Sierra International 35-SS625 Marine-Grade Rostfritt stål Panther Safe-Skeg för Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu och Yamaha utombordsmotorer

Brand:‎Sierra International

3.8/5

1761.90

Sierra International 35-SS625 Marine-Grade Rostfritt stål Panther Safe-Skeg för Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu och Yamaha-motorer Oavsett om du vill skydda din nya skeg, reparera din skadade eller bara vill lägga till lite glans, Sierras Panther Safe-Skegs 316 marinklassade rostfria stålkonstruktion är briljant polerad och installationen tar bara några minuter! Sierra erbjuder ett komplett sortiment av Ultimate Skeg Protection and Repair. YTTERLIGARE DETALJER • Erbjuder skydd av 316 marinklassat rostfritt stål • Briljant polerad med en sömlös design • Innehåller ett dräneringshål för att skydda mot korrosion och frysning • Installationen tar bara några minuter • Materialtjocklek: 1,5 mm (50 % tjockare än konkurrenterna) • Skid Plate är inte nödvändig på grund av extra tjocklek i Safe-Skeg-materialet • Satsen innehåller: Safe-Skeg, monteringsutrustning, instruktioner, insexnyckel och Loctite 262 APPLIKATIONSINFORMATION •Designad för att passa: Force Outboard – 70-90 HP (av Mercury), 2-takts från år 1998 till 2002 Honda utombordare – 75-90-115 hk, 4-takt från år 1995 till 2007 Mercury/Mariner utombordare – 50-60 hk (stor fot), 2 och 4-takt från år 2003 genom nuvarande Mercury/Mariner utombordare – 70-75-80 hk, 2- och 4-takts från år 1984 till nuvarande Mercury/Mariner utombordare – 70-90-100-115-125 hk Optimax, 2- och 4-takts från år 1983 till nuvarande Nissan Utombordare – 70-90-115-120-140 hk, 2-takts från år 1983 till nuvarande Tohatsu utombordare – 70-90-115-120-140 hk, 2-takts från år 1993 till nuvarande Yamaha utombordare – 60-70- 80-90-100 hk, 2- och 4-takts från åren 1998 till 2001 OM SIERRA Sierra är dedikerade till att skydda dig och din investering. I 50 år har Sierra, ett av de mest pålitliga namnen inom marinindustrin, stolt erbjudit motor- och drivdelar av hög kvalitet. Deras produkter uppfyller eller överträffar den ursprungliga utrustningsdelen den ersätter och är konstruerade för att möta dagens höga krav på motorkrafter samtidigt som de tål den hårda marina miljön. SIERRA. /b> Alla Sierra delar kvalificerar sig för Sierra. Sierra garanterar att deras produkter är fria från defekter i utförande och material under produktens livslängd. Sierra reparerar eller ersätter den defekta produkten utan kostnad. villkor och begränsningar. Du kan se Sierra.

Materialtjocklek: 1,5 mm (50 % tjockare än tävlingen). För: Välj Force, Mercury/Mariner, Nissan, Honda, Tohatsu och Yamaha utombordare marinmotorer. Se Produktbeskrivning nedan för fullständig applikationsinformation. Innehåller ett dräneringshål för att skydda mot korrosion och frysning. Briljant polerad med en sömlös design. Satsen innehåller: Safe-Skeg, monteringsutrustning, instruktioner, insexnyckel och Loctite 262.
Brand ‎Sierra International
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS625
Item Weight ‎1.62 pounds
Manufacturer ‎MARINETECH PRODUCTS INC.
Manufacturer Part Number ‎35-SS625
Model ‎35-SS625
Product Dimensions ‎0.75 x 9 x 18 inches

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array