attwood 4505-7 Sahara S500 automatisk länspump, 12 volt, 1,5 ampere drag, ¾-tums innerdiameterslang, 29-tums 16-gauge tråd, ospecificerad S500 länspump

Name: attwood 4505-7 Sahara S500 automatisk länspump, 12 volt, 1,5 ampere drag, ¾-tums innerdiameterslang, 29-tums 16-gauge tråd, ospecificerad S500 länspump
Brand: Attwood
SKU: 0012304706021
Price: 1200.07 SEK
Availability: InStock

Brand:Attwood

3.6/5

€
1200.07

Denna Attwood Sahara S500 automatiska länspump ger pålitlig länsvattenpumpning för båtar av alla storlekar. Denna pump uppfyller kraven på en länspump med automatisk växling för alla fartyg som är 20 fot och över med sovplatser, och den är bekväm och pålitlig för en båt av alla storlekar. Denna pump är ett kompakt och hållbart paket som inkluderar pumpen, trådtätningarna, silen och den kvicksilverfria strömbrytaren allt i en enhet som installeras snabbt och enkelt i trånga utrymmen. Den monteras endast horisontellt. Denna 12-volt, 1,5-amp dragpump är klassad för 500 GPH prestanda vid öppet flöde (vid spänning på 13,6 volt DC), och den drar endast 1,5 ampere vid öppet flöde. Den levereras med en 29-tums längd av 16-gauge tätad och förtennad koppartråd, och använder en ¾-tums slang med inre diameter. Attwood Corporation har varit en prisbelönt ledare inom konstruktion, testning och tillverkning av marina produkter av högsta kvalitet i över 100 år. Vi levererar säker och pålitlig belysning, bränslesystem, vattensystem, sittplatser och piedestaler, badstegar, anpassade klädsel och allmänna marina tillbehör som är enkla att installera och uppfyller regelverk.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0012304706021

Kategorier Sport & utomhus, Sport & Fitness, Båt & segling, Båtar & Utrustning, Båt VVS, Bilge Pumps,

Levereras med en 29-tums längd av 16-gauge tätad och förtennad koppartråd, och använder en ¾-tums slang med inre diameter. 12-volt, 1,5-amp dragpump är klassad för 500 GPH prestanda vid öppet flöde (vid spänning på 13,6 volt DC). Installeras snabbt och enkelt i trånga utrymmen, monteras endast horisontellt. Kompakt och hållbart paket inkluderar pump, trådtätningar, sil och kvicksilverfri brytare i en enhet. Också bekvämt och användbart för båtar av alla storlekar. Uppfyller kraven på automatisk växlingspump för alla fartyg som är 20 fot och äldre med sovplatser. Ger tillförlitligt länsvattenpumpning för båtar av alla storlekar.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Attwood
Brand	‎Attwood
Color	Unspecified
Color	‎Unspecified
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 1,195 ratings 4.6 out of 5 stars
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Included Components	‎End Product & Information
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.37 x 7.75 x 8.12 inches
Item Dimensions LxWxH	‎7.37 x 7.75 x 8.12 inches
Item model number	‎4505-7
Item Package Quantity	‎1
Item Weight	0.8 Pounds
Item Weight	‎0.8 Pounds
Item Weight	‎12.8 ounces
Manufacturer	‎Attwood
Material	Other
Material	‎Other
Part Number	‎4505-7
Pattern	‎Bilge Pump
Power Source	Ac/dc
Power Source	‎Ac/dc
Product Dimensions	‎7.37 x 7.75 x 8.12 inches
Size	‎One size
Style	S500
Style	‎S500

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Amazon Customer

Best for the money!

Replaced older model. Loved that one as well.

Scritto da: Adi lew

Works grate

Works grate

Scritto da: Russell Black

Very happy

Boat bilge

Scritto da: Michael P.

Perfect fit

This was an exact replacement for my boat. Great price also.

Scritto da: SEA ANTSY

3 DEFECTIVE ATTWOOD PUMPS ? WOULD YOU TRUST YOUR BOAT TO ONE ??

1 Dec Email to Customer “SERVICE” dept of Attwood. So XXXX...Just to recap my issues.. Pump #1 lasted about a month..(purchased 28July2014.. the motor shaft " dissolved"? see attached pix.. Pump #2 arrived with the float switch wired backwards internally, ie float down is ON and up is OFF!!! Pump #3 lasted about 40 days and failed with a locked motor shaft. I started calling the warranty line about 2 weeks ago and only EVER get to leave a message.. never have I EVER gotten a call back. Replacing the pumps costs me $20 a shot to have the guy come and splice in the bilge connections... so for a $50 pump I am currently out a additional $60... and currently have NO working pump, and no response from ATTWOOD. There is a UTUBE link that will demo the problem(s) (I cannot link to here) Here is a copy of my invoice from Amazon (purchased 28 July 2014) and a pix of the dissolved shaft.. if you wish any of these returned please send me a shipper.. Signed Sea Antsy Response recd from XXXXX XXXXXX call center manager ( with my comments) Dear Bob Our warranty procedure states to send the parts back with a copy of the receipt to receive a replacement. XXXXX made an exception seeing as you emailed a copy of your receipt, so he sent you a pump to make sure you had a working pump on your boat. I can send you a replacement once you send in the failed pumps. We do not cover shipping or labor cost. (COMMENT BY SEA ANTSY) At this point the only positive that I can take away from this painful & expensive saga is that I did NOT and WILL NOT incur any further costs by sending the 3 failed pumps back to ATTWOOD. I would also like to get some information on how you are using these pumps. I see the picture of the deteriorated impeller shaft, which appears to be electrolysis ( stray current in the water)(COMMENT BY SEA ANTSY) ?ELECTROLYSIS.. on ONE of YOUR pumps but not the others?? Within ~1month ???And for the FIRST time in the life of this 25yr old boat??? And without any sign of galling/corrosion?? Absurd. as for the pumps that are dying prematurely, are they running continuously ? (COMMMENT BY SEA ANTSY) No, not continuously, rarely even when they are SUPPOSED to!!! ..and when they die its only rain water that they are sitting in… are they removing rain water or is there a leak in your boat? are they used in fresh water or salt water? (COMMENT BY SEA ANTSY) ? SALT WATER…. What does that have to do with anything .. is there some hidden caveat that they are unsuitable for salt water… no these are in the bilge of a Boston Whaler and only RARELY even discharge the rainwater!!! Regards XXXXX XXXXXXTechnical Call Center Supervisor Attwood Corporation (COMMENT BY SEA ANTSY) This unfortunate exercise of time, labor and money was amicably resolved TO ME by AMAZON customer service who provided a full refund.

Scritto da: Judith Sadows

Works like a dream

Easy to install. Repair for my boat

Scritto da: Rebecca R Miller

Perfect for my 18’ Fish&Ski Combo

Very easy to install and moves a lot of water. I would recommend for any boat like mine (18’ Fish and Ski Combo)

Scritto da: jolly jack

Clearing up negative comments

Received this week. Reviewed 1 Star comments before buying and there was reference to “ electronic sensing” The pump that I have received “has a FLOAT SWITCH” which Negates the Negative Reviews??? This is used as ‘ a backup - to large Rule pumps’ - “ if you will, “a Canary in the Mine” Please Note - it’s a float switch - therefore kindly change the negative reviews ????? Does what it says on the Package

Scritto da: Mike

All Good

All OK,, easy to install, no issues.

Scritto da: Adam

Works well, but doesn't pump super fast

It's not the fastest pump in the world, but auto float feature is simple and works great. Definitely a nice upgrade from having a pump AND switch in my bilge, even if it's a bit slower.

Scritto da: Donna T

Quick installation and works well!

The pump works well and was quick and easy to install!

Scritto da: Lisa T.

Perfect!

This product was easy to install and works perfectly! We were unsure buying this online but glad we did! Don't hesitate.

Scritto da: Denis B.

That it works.

Be aware that it does not come with a 3 pin connector. Also don't make the same mistake I did by taking off the complet support bracket. Just unclip the unit from its blue base when removing the old one.