EarlyGrow Medium frön och ört kupolformad propagator med ventilerad sidohöjdsförlängning och säkerhetsklämma, grön medium med sidoförlängare och clipset

Brand:EarlyGrow

3.6/5

1484.51

Ytterligare sidor och klämmor säljs separat, vilket möjliggör extra höjd. Klämmorna gör att locket och sidorna kan lyftas av i ett stycke. Detta set innehåller 4 säkerhetsklämmor, som är lätta att fästa och ta bort, och ger stabilitet och struktur till förpackningen. Kombinerar den populära earlygrow 70738 medium frö- och örtförökaren med ny ventilerad sidohöjdsförlängning möjliggör odling av växter till 10,5” i höjd under den genomskinliga ventilerade kupolen. Tillverkad av slitstark kraftig pp-bricka som ger många års service och transport av de mogna plantorna utan rädsla för att brickan ska gå sönder, bucklas eller skadas av fukt. Har en kraftig genomskinlig kupol som tillåter ljus att nå fröbädden och unga plantor obehindrat för att maximera fröns förökning och växttillväxt. Samma lock kan användas i fröbäddar utomhus under den tidiga säsongen för att skydda direktsydda frön, vilket gör dem idealiska för användning under tre säsonger både inomhus och utomhus. Idealisk för att upprätthålla fukt och fukt utan konstant uppmärksamhet genom att tillåta fukt att förbli innesluten inuti kupolen. Förlängningen kan tas isär för kompakt förvaring när den inte används och enkelt sättas ihop vid behov. Innehåller en ny förlängning av fyra paneler med ytterligare sidoventiler som kan öppnas eller stängas efter behov för att bibehålla den önskade fuktigheten för att maximera växternas hälsa och tillväxt.

Ytterligare sidor och klämmor säljs separat, vilket möjliggör extra höjd. Klämmorna gör att locket och sidorna kan lyftas av i ett stycke. Detta set innehåller 4 säkerhetsklämmor, som är lätta att fästa och ta bort, och ger stabilitet och struktur till förpackningen. Kombinerar den populära earlygrow 70738 medium frö- och örtförökaren med ny ventilerad sidohöjdsförlängning möjliggör odling av växter till 10,5” i höjd under den genomskinliga ventilerade kupolen. Tillverkad av slitstark kraftig pp-bricka som ger många års service och transport av de mogna plantorna utan rädsla för att brickan ska gå sönder, bucklas eller skadas av fukt. Har en kraftig genomskinlig kupol som tillåter ljus att nå fröbädden och unga plantor obehindrat för att maximera fröns förökning och växttillväxt. Samma lock kan användas i fröbäddar utomhus under den tidiga säsongen för att skydda direktsydda frön, vilket gör dem idealiska för användning under tre säsonger både inomhus och utomhus. Idealisk för att upprätthålla fukt och fukt utan konstant uppmärksamhet genom att tillåta fukt att förbli innesluten inuti kupolen. Förlängningen kan tas isär för kompakt förvaring när den inte används och enkelt sättas ihop vid behov. Innehåller en ny förlängning av fyra paneler med ytterligare sidoventiler som kan öppnas eller stängas efter behov för att bibehålla den önskade fuktigheten för att maximera växternas hälsa och tillväxt.
Assembly required Yes
Batteries required No
Brand EarlyGrow
Color Green
Country of Origin United Kingdom
Customer Reviews 4.6 4.6 out of 5 stars 2,847 ratings 4.6 out of 5 stars
Indoor/Outdoor Usage Indoor
Item Dimensions LxWxH 9 x 15 x 7 inches
Item model number 95468
Item Weight 2.61 pounds
Manufacturer EarlyGrow
Material Plastic, Polypropylene
Material Plastic, Polypropylene (PP)
Mounting Type Inside Mount,Outside Mount
Number of pieces 4
Pattern Solid
Plant or Animal Product Type Herbs
Product Dimensions 9 x 15 x 7 inches
Product Dimensions 9"D x 15"W x 7"H
Shape Rectangular
Special Feature Durable

3.6

13 Review
5 Star
76
4 Star
13
3 Star
6
2 Star
2
1 Star
3

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Misa
Sturdy! but…
I give this a 5 star versus the 4 or 4.5 that I would have normally given this due to the extensions not being flush with itself. I tried different ways of screwing the corners together but it seems like the holes weren’t drilled right. (Currently waiting for the replacement to try to get a perfect set.) I saw some reviews about the kid being warped but mine was perfect. The only issue I had was the extension. Overall, I’d buy this again even if it meant I’d have to request a replacement to see if the extension will be flush. Will update when the replacement comes in!
Scritto da: Benjamin Figueroa
Well worth it!
There was nothing i disliked. Specially with how sturdy and safe it feels once put together, compared to what's out there something can still crush your babies with the material, in this case babies are just fine if something heavy falls on them inside this product! Worth it to me... The one thing that i think would have made it all stars for me is if the parts used to tighten into each other holding sides together could be made a tad bit easier to grip I would be fully satisfied...
Scritto da: Duke12687
Nice and sturdy for the price. Definitely could use some improvements.
I have been searching for a sturdy propagator for a while and they are all very expensive. I was glad to find this one priced at around $33. That is a great deal considering this hard plastic will last a long time. Here are some notes. Pros: -Great price -Sturdy plastic will last a while -Vents and ability to adjust Cons: -Missing a nut, so I can't put one screw in -Little to no instructions whatsoever. Basically had to guess how all the pieces fit together. I had to re-do the extender pieces several times until I could get everything fitted together properly. This could be easily avoided by including some detailed instructions. -One of the vents didn't fit into it's hole properly so I had to tape it basically making it useless. -The tray was a bit smaller than expected, but the height is really what I was looking for.
Scritto da: dee
Best dome
Best dome I have purchase vert sturdy. I had issues with the high top it seemed to not fit correctly as other had stated. Then realized it was not assembled correctly. Once I assembled in the correct manner it has been sweating ever since.
Scritto da: Mandy & Jake
I’d still buy it again.
So I absolutely love the material and thickness of it. Heck I only use one of the two extenders. So to me its definitely my favorite. My only complaint is that the clips used to keep them connected are a straight up joke. To the point where it does make it frustrating.so I’m trying to figure out a fix. Beside that I would 1000% buy it again!!
Scritto da: lori z
Great value
Solid and easy to assemble
Scritto da: Alton H.
Heavy Duty
This isnt the flimsy plastic. This thing is a beast. It should last for a very long time. I own 2 of the medium ones and 2 of the herb ones and im seriously thinking of ordering more. The only negative i can say is the way its packed worried me every time but i never had one come broken. I recommend this because of its durability.
Scritto da: Jennifer????John
Built Solid
Held up. Solid sturdy Abs plastic. Came with everything, could ask for more. Would purchase again.
Scritto da: Wendy Earle
Very sturdy well made
Very well made, not flimsy at all. Fits many babies in there too. Fast shipping and good value for my money
Scritto da: Tsquarish
Very sturdy but pricey
For what it is, seems expensive, but I guess that’s how all greenhouse products are getting these days. However will say it is very sturdy. The dome is acrylic I believe and thick so quite durable. And the tray doesn’t bend when you’ve got it loaded up which is nice. This is a bit smaller than a standard dome but that’s what I needed for my small shelf. It wouldn't work well to grow taller things like lettuce in it.
Scritto da: Richard Parsons
Assembly can only be hand tight to prevent "Warping"
Good, sturdy little greenhouse. I found the most important thing when assembling (to prevent warping) is to only tighten the plastic screws hand tight, as any tighter causes the slots for the screws to mis-align and CAUSE the warping. ONLY tighten enough to snug up the corners, if it does warp a little, loosen the screws enough to make everything flat then re-tighten to just snug. :D
Scritto da: Sean Berrigan
Very Thick, Solid plastic dome but doesn't make a proper seal
I saw a lot of people complaining about the dome not making a proper seal but ordered it anyways. I received the product and indeed once the top half of the dome is attached there is some sort of warping happening on the sides and it doesn't make a seal, which will effect regulating the atmosphere inside it. I might be able to put weights on top of the dome to help with the seal but even then it doesn't 100% seal it. Kinda bummed about this.
Scritto da: matthew
Worthwhile if youre having humidity issues
Kept humidity stable, and was tall enough for a solo cup to be inside and have clearance for plants to sprout. Plastic vents are sturdy and form a complete seal, the plastic is nice and sturdy. Too cheap to buy a humidifier for the winter months, glad this helped my luffas mature.

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array