E-Z LOK-drivverktyg - tillval - Använd med 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 6 -6, 400-4, 400-428, 400-M6 500-3

Name: E-Z LOK-drivverktyg - tillval - Använd med 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 6 -6, 400-4, 400-428, 400-M6 500-3
Brand: E-Z LOK
SKU: 0839137000023
Price: 547.25 SEK
Availability: InStock

Brand:E-Z LOK

3.3/5

€
547.25

Drivverktyg för E-Z LOK gängade insatser. E-Z LOK gängade inserts drivverktyg påskyndar installationen av gängade insatser utan att koppla in invändiga gängor. Sätt snabbt in gängade skär för metall med detta valfria gängade skärinstallationsverktyg utan tidskrävande gängingrepp. En standardaxel tillåter användning av detta gängade skärborrverktyg med standardborrmaskiner och borrpressar. Hastigheter med hög volyminstallation Drivs snabbt i gängade skär. Installationen är enkel. Borra helt enkelt ett hål med en vanlig borr. Trä en E-Z LOK gänginsats på plats med detta valfria drivverktyg. Egenskaper * Snabbt installerar gängade skär * Används med E-Z LOK solid vägg gängade insatser för metall * Passar standard borrmaskiner och borrpressar

Belopp

Lägg till i kundvagn Köp nu

EAN: 0839137000023

Kategorier Industri & vetenskap, Spikar, Skruvar & Fästelement, Gängade insatser, Externt gängade insatser,

DET ÄR LÄTT SOM 1-2-3 - Installationen är enkel. Borra helt enkelt ett hål en standardborr. Knacka på hålet med en vanlig kran. Trä E-Z LOK-insatsen på plats med detta valfria drivverktyg. FÖR ANVÄNDNING MED GÄNGAD INSATS - Detta installationsverktyg används med E-Z LOK solida vägginsatser för metall. PASSAR STANDARDMOTORBORAR – Ett standardaxel gör det möjligt att använda detta gängade skärborrverktyg med standardborrmaskiner och borrpressar. SNABBAR INSTALLATIONEN – Sätt snabbt in gängade insatser för metall och knivgänga insatser för hårt trä med detta valfria gängade insatsinstallationsverktyg utan tidskrävande gängingrepp. INSTALLATIONSVERKTYG FÖR GÄNGAD INSTÄLLNING – E-Z LOK Driven Tool för gängad insats påskyndar installationen av gängade insatser utan att koppla in invändiga gängor.

Brand	E-Z LOK
Color	Silver, Black
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH	4 x 1 x 1 inches
Item model number	500-3
Manufacturer	E-Z LOK
Material	Tool Steel
Product Dimensions	4 x 1 x 1 inches; 0.32 Ounces
Size	500-3

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Dave Berthiaume

Best way to install threaded inserts.

This tool works great in a drill press when turning the chuck by hand. The inserts go in straight and fast.

Scritto da: bcall

Probably okay for soft wood, doesn't last long for hard woods

I bought this to screw in around 30 ez-lok wood inserts into hard wood. The tool worked okay for the first 10 or so, but as I continued on the tool started slipping against the insert more often, producing little brass chips. I was driving the wood inserts into a hardwood that needs to support a lot of weight so I didn't want to try enlarging the pilot hole further. By the end, I could only use the tool for removing the inserts. I used a stainless steel screw and some bolts to drive the wood inserts in. Do I recommend the tool? Yes, if you're using it with softwood or only have a couple wood inserts to install. If you're installing dozens of wood inserts into hardwood, I think you'll be disappointed by how long the tool lasts.

Scritto da: Ed wells

Well worth the money

This tool did the job on my ford expedition. It was easy to remove a old sleeve that had been installed in the spark plug hole wrong by a previous owner. I would recommend this product

Scritto da: BWAZ

It breaks the notch of the brass inserts easily

When driving an insert, the bit tends to back itself out or ruins the notch of the insert easily. Seemingly good concert, really hard to use on hardwood.

Scritto da: George N. Lawrence

Also works very well with Hillman 3/8 brass threaded insert

Although only the E-Z Lok numbers are mentioned, I found this 500-5 to work very well with the Hellman 3021 3/8-16 brass threaded insert. Note there are tabs on either side of the 500-5 that have to fit into the slots of the insert. The slots of many threaded inserts are too narrow for these tabs. But slots of the Hellman 3021 are wide and work very well. Assuming you are wiling to lay out about $2 per 3/8 insert, the Hillman is, in my opinion, the strongest insert and is great for both soft wood and hard wood. The 3/8 inch Hillman is almost an inch in length and should have a higher pull-out force in soft wood than shorter inserts and also work fine in hard wood (if you have the length available). An additional advantage is that brass inserts have noticeably less friction than steel inserts. I can drive the 500-5 straight using my impact drill and can extract the insert with the same tool provided I keep firm downward pressure. The only limitation to this 500-5 is its OD is larger than the 15/32 inch hole Hillman recommends and I have to stop when the insert is flush. I like to drive the Hillman insert a bit below flush for optimum strength. The T-handle hand tool that Hillman sells for about $7 has an OD smaller than 15/32 and can drive the insert below flush with a turn or two at the end and extract a sub-flush insert back to flush with the same tool. My impact drill with the 500-5 can start up and finish the job outside of flush. I also bought the 500-4 which works well with the 5/16 inch Hillman inserts, but the 5/16 inch Hillman is a lot shorter than the 3/8 Hillman so I kept to the 3/8 inch Hillman and coughed up the money.

Scritto da: Cabby

The keystone to jigs

Much better than breaking my inserts with a flathead screwdriver... I always wondered how in the wood magazine’s jigs, router tips and tricks how each jig had inserts installed in many places but meanwhile in the reality of my garage I could only install one and crack/split 4. Also in the magazines the inserts would be driven in vertical and straight when every single one I tried to install went in diagonal or twisting off axis and there for useless. Then I stumbled upon this insert driver WOW so there was a secret to installing these inserts and this is it...

Scritto da: T Miller

Amazon getting sloppy with deliveries

The product was as expected and seems to be worth it's value. I don't like some of the deliveries we've had a few times. This one was marked as to person at service desk. I live in a house and it was handed to no-one. It was left on the front porch, which is fine but why say something different than the truth? Possibly a mistake? Could be, but I think these delivery drivers are driven to distraction without time to stop to even go use a restroom. I like the service, but the treatment of the workers is lacking.

Scritto da: TimG45

Makes driving threaded inserts easier

This makes driving threaded inserts much easier than using a screwdriver or matching bolt to drive the inserts. My only complaint it that the shank is not ¼" hex, so I had to fit a socket to my driver to be able to drive the insert using this.

Scritto da: dhbcifuoev0

Worth Every Penny!

Makes installation of the threaded inserts much easier.

Scritto da: Marie Wagner

Perfect for what I needed it for

Scritto da: Ideal Gear & Machine Works.Ltd.

Good product

Good quality. Exactly what we expected.