CURT 56320 Fordonssidan anpassad 4-stifts släpkablar, passar till vissa Ford Escape

Name: CURT 56320 Fordonssidan anpassad 4-stifts släpkablar, passar till vissa Ford Escape
Brand: CURT
SKU: 0612314563203
Price: 1387.51 SEK
Availability: InStock

Brand:CURT

3.5/5

€
1387.51

Om ditt fordon inte är utrustat med ledningar för att dra en släpvagn är CURT anpassade ledningar den idealiska lösningen. Ett anpassat ledningsnät - även kallat en T-kontakt - är en enkel, plug-and-play elektrisk enhet som ansluts till ditt fordons elektriska system och ger en standard, universell släpvagnskoppling. Detta görs med två eller flera fordonsspecifika, OEM-kompatibla kontakter för att anslutas till bakljusenheten, vilket eliminerar behovet av skärning, skarvning och lödning under installationen. Anpassade ledningsnät görs fordonsspecifika, och även om de inte är tillgängliga för alla fordon, erbjuder de ett av de snabbaste, enklaste och säkraste sätten att koppla ett fordon för bogsering. Denna speciella plug-in sele har ett 4-vägs platt kontaktuttag och är designat för att vara ett anpassat ledningsnät för att passa vissa år av Ford Escape (för att verifiera ditt fordons kompatibilitet, se applikationsinformation). Den levereras med alla nödvändiga ledningskomponenter för att upprätta en pålitlig släpvagnskoppling, samt ett dammskydd för att hålla kontakten ren när den inte används. Du har en bild i åtanke av din nästa destination -- kanske är det båten som landar på din favoritfiskeplats, kanske är det en campingplats som har utsikt över ett av naturens mästerverk, eller kanske är det nästa stora arbetsplats. Men att förvandla den bilden till verklighet kräver mer än att bara dagdrömma. Det kräver en solid anslutning och rätt mängd kraft. CURT anpassade kablar är gjorda med några av de mest sofistikerade teknikerna i branschen och är designade för att installeras med lätthet, vilket ger dig en långvarig elektrisk anslutning för din dragkrok.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0612314563203

Kategorier Automobiler, Reservdelar, Ljus & El, Elektrik, Kabelsatser,

DAMMSKYDD. För att främja långvarig användning och väderbeständighet, kommer denna 4-poliga släpvagnsbelysningskabelhärva med ett dammskydd av gummi. Den passar lätt på den platta 4-vägskontakten när den inte används, vilket skyddar den mot utomhuselementen. PÅLITLIG KRAFT. Denna 4-vägs släpvagnskabelstamm är byggd med ytmonteringsteknik. Denna typ av kretsar genererar mindre värme, optimal ljusintensitet och hållbar prestanda. FORDONSPECIFIK. Detta eftermarknadskabelnät för fordon och släp är designat för utvalda år av Ford Escape. STANDARDKONTAKT. Denna plug-in 4-platta släpvagnsledning kan användas för att ansluta släpvagnsbakljus, bromssignalljus och blinkers. 4-vägs släpvagnsljusledningar är populära på en mängd olika släpvagnar, vilket ger mångsidiga dragmöjligheter för ditt fordon. LÄTT ATT INSTALLERA. Ingen skärning! Ingen skarvning! Denna släpvagnskabelsats ansluts till befintliga fabriksledningar på ditt fordon och utrustar den med en standard, bakre 4-polig släpvagnskabelkontakt för att koppla in och dra en släpvagn.

Brand	CURT
Brand	‎CURT
Connector Type	Plug-in
Country of Origin	‎Mexico
Customer Reviews	4.5 4.5 out of 5 stars 254 ratings 4.5 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56320
Item Weight	1.72 Pounds
Item Weight	‎1.72 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56320
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56320
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: phillip scarboro

Great easy installation

This product is a plug and play interface with the factory wiring. All you have to do is run a power wire to the battery from the back.

Scritto da: Larry

Works as it should, a lot of plastic has to be removed

The unit works great, but a lot of plastic and spare tire has to be removed

Scritto da: Bangster

Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED ...

This one actually fits my 2017 Escape, I should have done more due diligence and not listened to Amazons "this will fit your car" for the harness for the 2013-2016 Escape. I did cut it up so I didn't have to make hack and make giant holes for the entire connector to pass through to the tail lights, and I didn't run the wire to the front to the battery, but I utilized a fuse tap and the cargo area fuse panel, 5 feet of wire versus 20 running under the car. Everything was long enough, only part of the instructions I read was what side the single green wire went to. I was going to reverse engineer it to mount the box on the passenger side close to the power, but decided I might be pushing my luck. I chose to keep the 4 pin end bundled up in the spare tire well and will feed it out the lift gate bottom/gasket when connecting to a trailer. Tested it with a small light tester and with the trailer itself, everything works, doesn't cause any issues with the vehicle's lights. Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED lights, but I am sure this would have driven the incandescent lights as well. Might try that out if I get a cargo hauler and feel it might cover the tail lights, toss the shipped lights on it. Easy to install, like that it is inside the vehicle and not mounted outside and wires ran outside, but were I live it really wouldn't matter.

Scritto da: GARY L GOLDSMITH

Works great.

Not really that hard to install. Took me maybe 2 hours taking my time. I'm still not sure why the vendor opposes connecting the power source wire to the extra fuse panel in the rear of a 2018 Ford Escape Titanium ! It has constant power ! Using something like the AutoEC ATO ATC 21AMP Add-A-Circuit Fuse Holder Fuse Box Tap Kit would work fine. But since they don't support that Option I ran it to the battery which was pretty simple on the Escape hiding it above the drivers skid pan . I will also say I could not get the harness end inside the CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat. I tried everything

Scritto da: Ron

Easy install

Ford installed there version at the dealership when first owner purchased. After we bought car used, we later found out that brake lights didn't work for towing. Purchased this unit and installed the correct way. Works perfect.

Scritto da: Jake W ia

Fast "Plug & Play" Install. Under 1hr and done.

Installed by myself on my 2018 Ford Escape (SEL) Perfect!!! Install took just under 1hr with the right tools and a general idea of where to run and hide the wires. Direct Plug and Play set up with only wiring work needed was positive terminal hook up. Saved a couple hours compared to a universal wiring kit where you'd have to hunt down each wire coming off your tail light to splice into. Not to mention you'd have to alter factory wiring.. with this kit, you do not alter any factory wiring at all! All my trailer lights work perfectly when plugged into this harness. And I couldn't beat the Amazon Warehouse Pricing!!!

Scritto da: Benjamin Sutton

Perfect fit for 2017 Ford Escape Titanium

Had some issues finding a wiring harness that would fit my 2017 Ford Escape Titanium. After some research I found this product along with installation instructions on eTrailer's Youtube. It fits just as advertised! As for the product itself, I was impressed with how easy it was to install, even if it didn't come with the best instructions (just watch the video instead!). I drove over 600 miles this weekend hauling a small trailer with LED lights and had no issues. If you are looking for a trailer wiring harness for your 2017 Ford Escape Titanium, this is what you need!

Scritto da: Kathryn S

Mostly good

Does NOT work with the Hopkins 48595 mounting bracket as another review mentioned. The shape is completely different. I'm mostly happy with this wiring harness for my 2017 Ford Escape Titanium. I was able to get all of it installed myself. I ran the power wire to an unused fuse in the cargo area fuse box. My only negative is that the instructions have no mention of the fact that my Escape has some sort of part in the way of where it says to mount the black box. I had to zip tie the box beneath that same metal piece.

Scritto da: Greg B.

Returned defective.

Got a defective one, 1 of the circuits didn't work had to return. Refund no problem. Got a second one works great have used Curt products on other vehicles with no problem.

Scritto da: Customer

Positive purchase.

Ease of installation and worked as advertised.

Scritto da: vern

Worked perfectly

Easy to install, good instructions, worked as described

Scritto da: TaylorMartine

Included instructions are bad

I was able to install this easily after looking up a video with much better instructions.

Scritto da: waveyq

Worked for my car

followed instruction to install it. not easy one but worked finally.