Attwood 9090-5 justerbar batteribricka, för 24/24M-seriens batterier, kraftig svart plast, höjdjusterbar tvärstång

Name: Attwood 9090-5 justerbar batteribricka, för 24/24M-seriens batterier, kraftig svart plast, höjdjusterbar tvärstång
Brand: attwood
SKU: 0022697909053
Price: 394.54 SEK
Availability: InStock

Brand:attwood

3.7/5

€
394.54

När Gary Yamamoto designade Senko i början av 90-talet hade han ingen aning om att han skulle förändra framtiden för fiske. Det finns en Senko i sortimentet för alla möjliga applikationer och för varje sportfiskare, från nybörjare till proffs på turnénivå. Oavsett om du fiskar den tyngdlös, galen stil, Texas-riggad, på en Carolina-rigg eller på en skakig jigg, kommer denna enkla plastplatta att revolutionera ditt spel och öka dina fångster.

Inga enheter tillgängliga

EAN: 0022697909053

Kategorier Automobiler, Reservdelar, Batterier & Tillbehör, Batteritillbehör, Brickor,

Installera med #10 skruvar. Patenterad design. Uppfyller ABYC-standard E-10 och U.S.S. kustbevakningskrav. Inkluderar höjdjusterbar tvärstång och två fästbultar. Kraftig, rostfri svart plast. Uppfyller ABYC Standard E-10 och USCG krav. Innermåtten är 10 5/8 tum x 6 ¾ tum x 8 ¼ tum. Installeras med #10 fästelement. Inkluderar en höjdjusterbar tvärbalk och 2 fästbultar. Patenterad design. Tillverkad av kraftig, icke-korrosiv svart plast. Mångsidig, hållbar hållare för ett batteri i 24/24M-serien.

Brand Name	‎attwood
Color	‎Unspecified
Customer Reviews	4.6 4.6 out of 5 stars 102 ratings 4.6 out of 5 stars
Included Components	‎End Product & Information
Item Dimensions LxWxH	‎10.75 x 11.75 x 8.5 inches
Item Package Dimensions L x W x H	‎13.7 x 10.08 x 2.13 inches
Manufacturer	‎Attwood
Material	‎other
Model Name	‎Attwood Boating Tools
Number of Items	‎1
Package Weight	‎0.34 Kilograms
Part Number	‎9090-5
Size	‎One Size
Sport Type	‎Boating
Suggested Users	‎unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: debbie brinson

Meant my expectations for the $$

looks like it will serve its purpose.

Scritto da: Drone pilot

Excellent design

Works great

Scritto da: The Ratz Laugh

Great alternative to battery boxes

As part of a refit for a 1978 Sea ray boat, I purchased 2 of these to hold the batteries instead of using battery boxes. The new location I had chosen for the batteries did not allow the extra height needed to drop a battery into a box so these were a good option. There is plastic tabs or flange to secure the tray and it needs to be fastened down near the center so they do not flex with you secure the battery posts. Once installed, they require no tools to be able to install and remove the batteries, while securing the batteries. This is ideal in a marine application as tools are not always available when you have a battery issue. I had two different brand group size 24 batteries and both fit properly. Now the batteries are visible for inspection and secured properly. The only advantage of a battery box is the terminals are not exposed, but that can be resolved by using cables with covers for the positive terminals. Will use on the next boat I am refitting.

Scritto da: camptime

Doesn't fit Dakota lithium DL 60ah starting battery

I like the tray but. My batterie is to short to fit and not as long, as a normal group 24 lead acid battery

Scritto da: Roderick Cole Stewart

Hardware not included

You need 8 #10 sheet metal/wood screws and 8 washers to go with them. Other than that, the battery tray easily fit an XS Power D2400 with thermal protection on it. Very satisfied there. Wish it came with the hardware to install.

Scritto da: Jeffrey E. Starkey

Chaparral Boats uses these on their Sunesta Deckboats

I bought one of the other brands first since I didn't know better. The other brands straps dissolved in the minor acid that is on most batteries and they became useless! This tray has plastic that holds everything in place great! I can see why the boat manufacturer uses them. The one thing to keep in mind is that on smaller batteries, the cross member part might not seat all the way against the battery. I found that I could secure the smaller batteries by using 2 pieces of 1/2 PVC pipe cut an inch or two long depending on the height you need. You place the battery in, set the cross member over the top and then slide the PVC spacer over each of the two secure bolts. This causes the cross member to be secure on lower smaller batteries before the securing bold bottoms out and it holds the battery in very well!

Scritto da: TheC

plastic battery holder

Everything is plastic, and it has held up. I only installed and left it in the boat. I do not know how long it would last if you were changing the battery out. The whole thing is plastic which will not corrode in saltwater. I would buy again if I knew I was going to leave the batteries for a good while.

Scritto da: Cresty

As advertised

The only problem I had was that the mounting of the tray next to a bulkhead didn't leave enought room to turn the hold down bolt due to its (T) configuration. I just trimed down that portion since its plastic and there was still plenty of leverage to secure the bolt by hand. Looks good, built well and should last a long time.