Yost Skruvskruv 445 Kombinationsskruv

Name: Yost Skruvskruv 445 Kombinationsskruv
Brand: Yost Vises
SKU: 797734008326
Price: 2198.80 SEK
Availability: InStock

Brand:Yost Vises

3.8/5

€
2198.80

Detta verktygskombinationsrör och bänkskruvstäd har en 360-graders vridbar bas och monteras på en arbetsbänk till. Den 360-graders vridbara basen har 2 låsningar. Att dra åt låsvredet på basen för hand säkrar dess position. Yost Vises har tillverkat högkvalitativa skruvstäd och tillbehör till skruvstäd sedan 1908. Vi levererar våra produkter till både stora distributörer och enskilda hantverkare över hela världen, allt från industriella skruvstäder, professionella skruvstäder, verkstadsskruvar, lätta till tunga- arbetsskruv, multifunktionsskruv, svetsskruv, etc. Våra produkter uppfyller eller överträffar den industriella standarden enligt federala specifikationen GGG-V-410A, vilket ger konsumenterna kvalitetsprodukter som håller i flera år till ett bra pris.

Belopp

Lägg till i kundvagn Köp nu

EAN: 797734008326

Kategorier Industri & vetenskap, Verkyg & hemförbättring, El & handverktyg, Handverktyg, Arbetstagning, Växlar, Bänk skruvstycken,

GARANTI: Kommer med 1 års begränsad garanti och 90 dagars retur. SÄKERHETSINFORMATION: Felaktig användning av skruvstäderna kan orsaka allvarliga skador på ögon, händer och eller andra kroppsdelar. Vises måste sättas upp och användas på rätt sätt. Innan installation och användning, läs, förstå och följ alla instruktioner som beskrivs i manualen. YOST VISES KVALITET: Varje Yost Vises-verktyg är konstruerat för att ha höga krav på kvalitet, styrka och hållbarhet. Vi värdesätter kvalitet framför kvantitet och tillverkar produkter som är säkra och lätta att använda. Vi erbjuder livstids teknisk support för att backa upp vår kvalitetsgaranti. HUR MAN ANVÄNDER: Se till att skruvstycket är säkert monterat på arbetsbänken och att vridbaslåset är säkert. Öppna skruvstädet genom att vrida skruvstädhandtaget moturs. Placera föremålet mellan de tandade käftarna. Stäng skruvstädet genom att vrida skruvstädhandtaget medurs tills föremålet sitter tätt i de tandade käftarna, fortsätt att dra åt tills du inte längre kan flytta föremålet. Dra inte åt för hårt eftersom det kan skada föremålet och/eller skruvstädet. När du är klar med arbetet med föremålet, vrid skruvhandtaget moturs för att frigöra föremålet. SWIVEL BASE: 360-graders roterbar vridbar bas med 2 låsningar. TEKNISKA SPECIFIKATIONER: Käftbredd 4,5 (11,43 cm), Käköppning 4 (10,16 cm), Halsdjup 2,625 (6,6675 cm), Min Rörkapacitet ,125 (0,3175 cm), Max Rörkapacitet 2 (5,08 cm). KOMBINATIONSSTYCKE: Yost Vises 445 4,5-tums kombinationsrör och bänkskruvstäd är gjord av ett 30 000 PSI gjutjärn med U-kanalstång i stål. Utrustad med en stor städ arbetsyta. Har även som utbytbar härdat stål tandade toppbackar och en permanent tandad rörback med stor rörkapacitet.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Yost Vises
Color	Blue
Color	‎Blue
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 1,082 ratings 4.7 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 8 inches
Item model number	‎445
Item Package Quantity	‎1
Item Weight	17 Pounds
Item Weight	‎17 pounds
Manufacturer	‎Yost Tools
Material	Cast Iron with Steel U Channel Bar
Material	‎Cast Iron with Steel U Channel Bar
Measurement System	‎Inch
Part Number	‎445
Power Source	‎Hand Powered
Size	‎4.5 inches
Style	Modern
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Wayne Derber

An Important Vise Mounting Tip

It is often desired to mount a vise close to the edge of a workbench so that items may sometimes be secured vertically in the vise and extending below the top of the workbench. I thought doing so would require the vise to be mounted too close to the edge of my wood workbench (possibly causing the edge of the wood to eventually split off). An easy solution is to mount the vise ¾” further inward from the edge of the bench. Then when desiring to clamp a piece vertically in the vise, simply use a ¾” wood (scrap) spacer block on the inward jaw of the vise. The only small disadvantage of this method is that the jaw opening is decreased by ¾” when clamping an item vertically. But the big advantage is that my vise is mounted securely onto my wood workbench. So far, I have been well pleased with this Yost 445 vise.

Scritto da: Andrew Cunningham

Not perfect but not terrible

Positives, the vise has good weight to it. The size was perfect. The paint on it seems to be nice and thick. Smooth opening and closing. Negatives, the jaws don't perfectly line up when you close them. You have to kind nudge the moving jaw with hand to make them line up correctly. It's not easy to rotate. You have to loosen the two locking screws almost to the point of them completely disassembling and you still have to lift the vise to spin it on the base.

Scritto da: Shawn P Lillard

Great Vise With One Weird Issue

I bought this vise on the recommendation of a YouTuber. It's the perfect size for my 30" X 60" workbench. It's super sturdy and Yost has an excellent reputation. The one thing I have experienced is: if I clamp something in it and the item is not perfectly centered over the beam, The vise will jam when I loosen the jaw. It takes me having to give the outboard jaw a firm but not crazy hard bump on the side with the palm of my hand to release it. I have gotten used to it and I don't know if this is something common to this model but it's what happens to mine. Otherwise, I'm happy with it.

Scritto da: JXPitt

Great Product for the Money

Well finished and easy to install; I merely drilled four holes through the wood top and secured it with 2 1/2" bolts, washers and lock-nuts. Very well sized for my home workbench.

Scritto da: Scoby

well made

so far so good. Very well made

Scritto da: Andre Theoret

Very good value

Very happy. Good value.

Scritto da: joe

Decent

Replaced a 60 yr old Wilton vise. This yost is a decent vise for the money. I doubt it will last sixty yrs but I know I will not either. Does the job satisfied for the price.

Scritto da: Kindle Customer

great for small work bench

This vice is a perfect size for your average tinkerer. Not industrial duty, but strong enough to hold a 2x4 or 1 inch pipe to do a repair project. With soft jaws even your weapons

Scritto da: rgt

Seems OK

Used it for punching holes in a leather belt. My punch made indents in the flat area to be used for this purpose. Found that a bit surprising since supposed to be hardened steel. But over all, it works . I like the fact that can rotate it to accommodate the particular task that need a vise for.

Scritto da: I S.

ok depending on your application

Its ok depending on your application. Overall I didn't really like this vise. Too much play in the jaws. The horizontal bar through-piece is rolled steel, not cast, not precise enough to give precise alignment and reduce slack. All cast would be much better. Also, the screw is roughly machined resulting in rough turning movement. On the plus side, has separate jaws for holding pipe (two sizes) which is why I ordered it in the first place.

Scritto da: AaronE

Great vise

Make sure to mount this properly (I used metal washers above and below to distribute pressure and small rubber washers between the vice and my bench top for maximum stability), and it’ll work beautifully. Swivel works great (360 degrees) and it does its job. Super solid and good value.

Scritto da: Devo

Low Quality

Very cheaply made. Price reflects its quality. Poor action when operating, spring grind and loose fitting jaws. Will use as secondary tool for light jobs. However, Shipping and deliver was excellent. LOL.

Scritto da: Kindle Customer

Good from the price point

For light jobs ok...not for heavy duty stuffs. I you need to hammer and knock hard this is not a vise for you. Other than that sawing etc it's suitable. The vise it's a bit light in weight and does not give one a solid feeling when using.