SharkBite 1/2 tums MNPT-adapter, tryck för att ansluta VVS-koppling i mässing, PEX-rör, koppar, CPVC, PE-RT, HDPE, U120LFA 1/2 tum.

Brand:SharkBite

3.7/5

348.58

PRODUKTBESKRIVNING Förenkla dina VVS-behov med SharkBite Push to Connect MNPT-hanadapter. SharkBite-kopplingarna är sammansatta av hållbar blyfri mässing och har en fullflödesdesign för maximal vatteneffekt. SharkBite-kopplingar kan användas med valfri kombination av koppar-, PEX-, CPVC- eller PE-RT-rör, och har en design som är lätt att ansluta för att möjliggöra snabb installation. Ingen krympning, lim, lödning eller verktyg behövs, sätt bara in röret och de rostfria tänderna biter ner och greppar hårt, medan en specialformulerad O-ring komprimeras för att skapa en perfekt tätning. MNPT-adaptern kan enkelt tas isär med hjälp av ett frånkopplingsverktyg så att beslag och ventiler enkelt kan bytas och återanvändas (frånkopplingsverktyg ingår ej). MNPT-beslaget kan även vridas efter montering för att möjliggöra enklare installation i trånga utrymmen. Denna MNPT VVS-armatur är en certifierad tillverkad skarv som kan installeras i våta ledningar och för både underjordiska och bakom väggen applikationer. MNPT push to connect-adaptern är klassad för 200 psi och 200 grader F och kommer med 25 års garanti. FRÅN TILLVERKAREN SharkBite är push-fit anslutningssystemet som verkligen får fäste. Det är det enklaste sättet att foga ihop koppar-, CPVC- eller PEX-rör i valfri kombination - utan lödning, klämmor, kopplingar eller lim. Sätt bara in röret och tänderna av rostfritt stål biter ner och greppar hårt, medan en specialformulerad O-ring komprimeras för att skapa en perfekt tätning. Demonteringen går lika snabbt med det enkla frånkopplingsverktyget. Så kopplingar och ventiler kan enkelt bytas och återanvändas. De kan även vridas efter montering för enklare installation i trånga utrymmen. Skaffa SharkBite och få grepp om ditt nästa VVS-projekt. Dessa kopplingar är blyfria och uppfyller alla krav för VVS i Kalifornien och Vermont.

CERTIFIERAD: MNPT-kopplingen är certifierad som en tillverkad skarv och kan användas för applikationer under jord och bakom väggen utan åtkomstpaneler; klassad för 200 psi och 200 grader F. HÅLLBAR: Beslaget är blyfritt och korrosionsbeständigt för långvarig hållbarhet och tillförlitlighet. KOMPATIBEL MED TRÄNTA UTRYMMEN: Mässingskopplingen kan enkelt roteras på röret efter installation för användning i trånga utrymmen. LÄTT ATT ANVÄNDA: Rak anslutning har en innovativ push-to-connect-design som möjliggör snabb och enkel installation; inga verktyg, lödning, krympning eller lim krävs. MÄSSING HANLEPPSLAG: Hankoppling kan användas för att ansluta till valfri kombination av koppar-, PEX-, CPVC- eller PE-RT-rör; kan användas för våta linjer.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Relaterade produkter

hot
Zurn AG-5 - Air Gap Fitting, Blå
0.1/5

€ 1136.76

Zurn AG-5 - Air Gap Fitting, Blå
0.1/5

€ 1136.76

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array