Redcat Racing HUK-1P Volcano EPX Hop Up Kit, lila

Brand:Redcat Racing

3/5

1683.86

Redcat Racing Part # HUK-1P VOLCANO EPX hop up kit, lila. Kompatibel med följande Redcat Racing-fordon: VOLCANO EPX/EPX pro. Redcat Racing ligger i USA och har en full stab av supportpersonal som hjälper dig med din Redcat Racing-produkt. Se din fordonsmanual för korrekt montering och montering. Sedan 2005 har Red cat varit din källa för snabba - prisvärda - roliga! delar inkluderade: 02131p styrspindel (2) 08055 främre nedre arm (2) 08056 bakre nedre arm (2) 06048 spännskruv med bearbetade aluminiumstångsändar (4) 02130p bakre navhållare (2) 102057 servo saver set 02132p främre C nav (2) 3x14 Bhs (14) 3x12 Bhs (2) 3x3 stiftskruv (2)

Kompatibel med följande Redcat Racing-fordon: vulkanen EPX/EPX Pro. För felsökning och garantiinformation vänligen kontakta en Redcat Racing kundservicespecialist på 602-454-6445 eller genom att maila amazonsupport@redcatracing.Com. Se din användarmanual för att säkerställa att detta är rätt del för din modell. Använd endast äkta Redcat Racing reservdelar för att uppnå bästa prestanda med dina Redcat Racing-fordon. Äkta Redcat Racing Ersättningsdel # HUK-1P.
Customer Reviews 4.0 4.0 out of 5 stars 40 ratings 4.0 out of 5 stars
Item model number HUK-1P
Item Weight 10.3 ounces
Manufacturer Redcat Racing
Manufacturer recommended age 14 years and up
Product Dimensions 14 x 8.5 x 1 inches

3

8 Review
5 Star
56
4 Star
13
3 Star
18
2 Star
5
1 Star
9

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: George
Don’t waste your money
Save your money the turn buckles are sloppy I Put the plastic ones back in The front knuckles have a lot of sloppy Not worth the price
Scritto da: BiffSoQuick
Need instructions. Schematics view from Redcat racing website is not enough.
If this is your first "hop up" or upgrade kit be ready for some trial and error. Instructions are not detailed. A tool list would have been helpful as well. I was lucky enough to have the the little tinny hex sizes required (1.5) for the shocks removal. Also need a hex size 2 for the rear wheel hub retaining pin. Speaking of the shocks, I lost several of the shocks rider bolts (tinny hex pins) on my first drive after installing this kit. The shocks pins work themselves out while driving as they are very loose (see pic). I recommend some type of locktight or thread locker (probably medium or blue) on these pins.
Scritto da: Rabidbat racing
A great project. Needs alot of set up!
Note: This requires some skill to set everything up. It is not just a simple swap out of componants. Once assembled, camber, toe in, shock position, etc all need to be tuned. You will need to get wheel bearings, C hub bushings as well. I used a good silicone grease for all. Must have Thread Locker 242 (removable). Now I'm itching for the shock towers, control arm carriers, and chassis plate! Weee! (I set the rear arms parallel, with a little angle on the front, 2 degrees neg camber all around, and 3 degrees toe in. 50 wt in the shocks.)
Scritto da: BP Hawk
No instructions
I bought this hop up kit recently. Quality of the aluminum is good although I had one item that did not have treads in it and it requires threads. So I had to leave the old factory part on instead. But my big complaint is that it says at the bottom of the package "for installation instructions go to ...". Well guess what the website is nonexistent. So I went to redcoats website and opened the schematics for the rc car to help guide me and the schematics online are hard to see (blurry) and it's of a slightly different car. The parts in the hop up package are not labeled and it took a lot of time to carefully ID and determine what part goes where. My suggestion if you plan on purchasing is study the parts carefully or you will find yourself putting stuff on and taking it off again.
Scritto da: Binoj Daniel
No instructions or markers on the parts to know which side is right
I wish there were some markers or directions on how to install them. Put them backwards had to take out the entire setup and redo.
Scritto da: Bronson
Good quality
Everything fit perfectly. Very pleased with the quality of the parts. Highly recommended.
Scritto da: Travis Stagg
Five Stars
Product was perfect. Works great, everything they advertised, and shipping was fast. Thank you
Scritto da: kim marshello
Great upgrade
Fit perfectly

Relaterade produkter

hot
ARRMA Chassiplatta, ARA320514
3.7/5

€ 1401.45

ARRMA Chassiplatta, ARA320514
3.7/5

€ 1401.45

hot
ARRMA takräcke
3.5/5

€ 386.50

ARRMA takräcke
3.5/5

€ 386.50

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array