Red Lion PumpWorks PW-CJ75 115/230 Volt, 3/4 HP, 8,1 GPM Cabriolet (Shallow eller Deep Well) Jet Pump, Svart, 97090701

Name: Red Lion PumpWorks PW-CJ75 115/230 Volt, 3/4 HP, 8,1 GPM Cabriolet (Shallow eller Deep Well) Jet Pump, Svart, 97090701
Brand: Red Lion
SKU: 0010121151161
Price: 4497.84 SEK
Availability: InStock

Brand:Red Lion

3.2/5

€
4497.84

SPECIFIKATIONER: 3/4 HP; 1-1/4-tums FNPT-intag; 1-tums FNPT-urladdning; 14,2 ampere vid 115 volt; 7,1 ampere vid 230 volt; 86 psi maximalt tryck; 199 fot; maximalt huvud. INGÅR: fabriksinställd 30/50 tryckvakt; injektorsats med flera munstycken/venturis; för applikationer med djupa brunnar byt ut injektorsatsen i brunnen för att säkerställa optimal prestanda. DUBBEL SPÄNNING: Kraftig motor, går på antingen 115 eller 230 volt; fabriksinställd på 230 volt, spänning på pumpen måste väljas för att matcha inkommande strömkälla; CSA listat i USA och Kanada. BYGGD FÖR ATT HÅLLA: robust gjutjärnshölje och injektor (ingår); glasfylld termoplastisk impeller och diffusor. APPLIKATIONER: Konvertibel jetpump med djupbrunnsinjektor designad för grunda brunnar ner till 25 fot eller djupa brunnar ner till 90 fot; passar perfekt för stuga eller litet hem.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0010121151161

Kategorier Verkyg & hemförbättring, Rough Plumbing, , Brunnpumpar,

Batteries Required?	‎No
Brand	Red Lion
Brand	‎Red Lion
Color	Black
Color	‎Black
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 21 ratings 4.2 out of 5 stars
Horsepower	‎0.75
Included Components	‎PUMP WORKS, 3/4 HP CONVERTILBLE JET PUMP, 115/230V
Item Dimensions LxWxH	19.6 x 9.3 x 9 inches
Item Dimensions LxWxH	‎19.6 x 9.3 x 9 inches
Item model number	‎PW-CJ75
Item Package Quantity	‎1
Item Weight	38 Pounds
Item Weight	‎38 Pounds
Manufacturer	‎Red Lion
Material	Cast Iron
Material	‎Cast Iron
Maximum Flow Rate	8.1 Gallons Per Minute
Maximum Flow Rate	‎8.1 Gallons Per Minute
Part Number	‎PW-CJ75
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎19.6 x 9.3 x 9 inches
Size	‎10.25" x 20" x 10"
Style	3/4 HP
Style	‎3/4 HP
Warranty Description	‎2 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: William K.

pump works well after it is installed, but very difficult to prime

The pump works well. I haven't had any issues with it. It is reasonably quiet for this type of pump. The pressure switch was set at 55psi instead of the stated 50psi. That is easily adjusted. Keep in mind that leaving the pump at higher pressure will shorten its life. The priming instructions were useless for my deep well installation. I would recommend prefilling the lines before attempting to prime the pump. It took me 3 hours and every trick in the book to finally get this pump primed. It is not the first deep well jet pump I have installed either.

Scritto da: Jason

Works well, quiet. Pressure switch was damaged on arrival

Would be a 5 star review as the pump is solidly built and works like a charm. Setup was straight forward and the pump is very quiet while operating. However it arrived with a badly damaged pressure switch which we had to replace(the old pump failed and we couldn't wait for a replacement). There was no damage to the box it was in so it had to have been damaged before/during packaging. Even counting the $40 for a replacement pressure switch it's still a good deal. Would recommend to anyone needing a convertible shallow well pump just make sure you check it over when it arrives.

Scritto da: NOT A HAPPY CUSTOMER

Broken Pressure switch

No visible damage but pressure switch does not work and allows the pump to run until something breaks if you are not paying attention, could be expensive and a bit dangerous. Now I have to learn to replace, zero quality control it seems. Doesn't matter about anything else regarding the pump because it did not work.

Scritto da: Gilles B

So far so good

Installation was relatively easy. Although the base plate has slots and various holes in it none of them lined up to be able to attach the pump to my pressure tank (which is over 20 years old), so I had to remove the base plate and drill a hole. Good value as the casing on my old pump cracked this past winter and the price to replace the casing or buy a new pump were the same. The paint on the pump is thick but brittle, so whenever you remove a fitting or screw the paint chips excessively and will lead to corrosion in that area. I think the motor on the old pump ran smoother (it was an original Red Lion 1/2 HP). Happy overall.

Scritto da: Peter Holman

not happy

what are you going to do about pump it wont work