Rain Bird ET/1PK25S droppbevattningssändare Installations- och borttagningsverktyg Kombimonterings-/sändarverktyg - installera/ta bort

Brand:Rain Bird

3.4/5

335.54

PRODUKTBESKRIVNING Rain Bird ET/1PK25S Installations- och borttagningsverktyg för droppbevattning. Bekvämt multifunktionsverktyg punkterar 1/2" droppslang och installerar Rain Bird droppare/emittrar eller 1/4" kopplingar i en snabb åtgärd. Installerar eller tar snabbt bort Rain Bird spotvattningssändare, 1/4” hullingförsedda kopplingar och 1/4” slangpluggar. Placera helt enkelt en sändare eller koppling i en specialiserad öppning i änden av verktyget; tryck in den hullingförsedda spetsen i sidoväggen på 1/2 slang. Dra bort verktyget och lämna kvar sändaren eller kopplingen inbäddad i slangen. Du är nu redo att skjuta in 1/4-slangen på din installerade emitter eller koppling. **Installationstips: för enklast penetrering av 1/2 droppslang, använd en lätt vridande rörelse när du sätter in hullingförsedda 1/4 sändare eller kopplingar. Denna teknik minskar den nedåtriktade kraften som är nödvändig för att förhindra tillplattning av slangen som kan orsaka penetration genom den motsatta sidan. Använd skåran på sidan av verktyget för att ta bort sändare eller kopplingar. Använd det större hålet som finns i handtagsänden på Emitter Tool för att sätta in dubbpluggar för att täta hålen i 1/2 droppslang. Rain Bird goof pluggar har små åsar för att hålla dem stadigt i verktyget; dessa åsar planar ut något när pluggen sätts in, vilket möjliggör enkel utplacering i slangen. Mycket synlig lila färg gör att verktyget lätt kan ses i gräs, jord, bark, kompost etc. Rain Bird "The Intelligent Use of Water". FRÅN TILLVERKAREN Rain Bird Corporation är ett privatägt företag som grundades 1933 under jordbruksboomen i Kalifornien. Vi är erkända som den #1 tillverkaren och leverantören av bevattningsprodukter och -tjänster i världen. Med försäljningskontor runt om i världen; vi erbjuder över 4 000 vattenbesparande bevattningsprodukter i mer än 130 länder. Sedan starten har Rain Bird producerat och erbjudit branschens bredaste utbud av högkvalitativa bevattningsprodukter för: gårdar, golfbanor, idrottsarenor, kommersiella utvecklingar och hem. Under de senaste 80 åren har Rain Bird tagit emot mer än 450 patent över hela världen. Inklusive den första för bevattning 1935 på vår ursprungliga slagdrivna sprinkler (US-patent nr 1 997 901) som revolutionerade jordbrukets livsmedelsproduktion och inledde en ny era inom bevattning över hela världen. 1990 utsågs denna ursprungliga slagsprinkler till ett historiskt landmärke av American Society of Agricultural Engineers. Våra produkter täcker alla aspekter av bevattning...timer/kontroller, pop-up roterande sprinklers, pop-up sprayhuvud sprinklers, sprinkler munstycken, bevattningsventiler, droppbevattning, dränering och mycket mer. Dessa produkter har valts ut och installerats över hela världen i de största och mest prestigefyllda projekten för bevattning av bostäder, kommersiella företag, jordbruk och golfbanor. Rain Bird har åtagit sig att The Intelligent Use of Water™ sträcker sig bortom produkter till utbildning, utbildning och tjänster för industrin och samhället. Vårt arv är att designa och tillverka endast produkter av högsta värde och kvalitet. Vi är tacksamma över att ha fått ett flertal utmärkelser från många av våra värdefulla partners. Rain Bird "Den intelligenta användningen av vatten

Mycket synlig lila färg gör att verktyget lätt kan ses i gräs, jord och kompost/bark. Hål i toppen av handtaget installerar dunpluggar för att täta hålen i 1/2 slang. Skåra på sidan gör det enkelt att ta bort kopplingar, sändare och dubbpluggar. För att enklare installera sändare och 1/4-kopplingar i 1/2-rör, använd en lätt vridning när du sätter in. Ger enkel applicering i ett steg av Rain Bird-droppar/avsändare, 1/4-kopplingar och slangpluggar. Installerar och tar snabbt bort Rain Bird-dropp/avsändare, 1/4 hullingförsedda kopplingar och slangpluggar.
Country of Origin Mexico
Customer Reviews 4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item model number ET/1PK25S2
Item Weight 0.009 ounces
Manufacturer Rain Bird
Product Dimensions 1 x 0.63 x 1.58 inches

3.4

13 Review
5 Star
69
4 Star
14
3 Star
8
2 Star
3
1 Star
6

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Sandra
made my job easier
it made my job easier
Scritto da: Angel Douglas
Very small so dont lose it, worked good for what It was needed for
I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.
Scritto da: JS
Slow shipping.
Works great
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Flamsteed
I needed his
I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.
Scritto da: JNK
Blade works great, hole punch not so much
The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.
Scritto da: Saeng Fio Chao
Great handy tool
With all others tool, I find this is the best one
Scritto da: Ed
Don't forget the tool!
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Annette Dreger
Very easy to use
Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!
Scritto da: Amazon Customer
retour imposible
J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item
Scritto da: DP Kindle Customer
It works!!
Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!
Scritto da: rferraro
Product description is misleading
I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....

Relaterade produkter

hot
Orbit 37128 Multi-Flex Riser , Brun
3.5/5

€ 271.49

Orbit 37128 Multi-Flex Riser , Brun
3.5/5

€ 271.49

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array