Quicksilver 822777Q1 Trim Tab Anod i aluminium för Mercury eller Mariner utombordare och MerCruiser akterdrev som använder högrakande propellrar, ospecificerad

Brand:‎Quicksilver

3.5/5

745.66

För applikationer där extra spelrum krävs för propellrar med hög rake. Passar de flesta Mercury/Mariner utombordare 35 hk och över, 1995 och nyare Force 90 hk och 120 hk utombordare plus alla MerCruiser Drives. Skydda din utombordare och akterdrev från de skadliga effekterna av galvanisk korrosion samtidigt som du hjälper till att kontrollera styrningen. Inspektera årligen och är lätt att byta ut med hårdvara som ingår i anoden. Quicksilver-varumärket är ledande när det gäller att leverera kompromisslösa motoroljor, delar och tillbehör till den marina industrin i över 65 år. Quicksilver är den främsta leverantören av Mercury Marine Original Equipment ersättningsmotordelar, oljor och tillbehör, men arbetar också för att betjäna alla Original Equipment-märken inom marin- och kraftsportsindustrin. Det har förtjänat en lojal följare genom att tillhandahålla produkter av högsta kvalitet som testas genom några av de mest rigorösa miljöerna och testprocedurerna. Inget eftermarknadsföretag kommer i närheten av forskning och design som Quicksilver; köpa Quicksilver är att köpa prestanda, skydd och sinnesfrid.

Tillverkad för att möta Mercury Marines originalutrustningstillverkares specifikationer för att bäst skydda din Mercury Mariner eller Force utombordare. Dessa gjutna aluminiumanoder uppfyller eller överträffar mil-spec MIL-A-24779(SH) och ger längre skydd än zinkanoder och är avsedda för användning i söt- eller saltvatten. Inspektera anoderna regelbundet för bästa skydd och byt ut dem när du ser tecken på korrosion eller gropfrätning för att hålla nere dina underhållskostnader. Varje anod är designad för snabb och enkel byte med vanliga verktyg och kom ihåg att kontrollera propellerspelet före drift. För applikationer där extra spelrum krävs för propellrar med hög rake. Passar de flesta Mercury/Mariner utombordare 35 hk och över, 1995 och nyare Force 90 hk och 120 hk utombordare plus alla MerCruiser Drives. Hjälper till att skydda växelhuset från korrosion eftersom det ger hydrodynamisk trimkraft till din utombordare och akterdrev för att underlätta styrningen.
Brand Name ‎Quicksilver
Color ‎Unspecified
Country of Origin ‎Venezuela
Customer Reviews 4.5 4.5 out of 5 stars 438 ratings 4.5 out of 5 stars
Fishing Technique ‎Spinning, Casting
Included Components ‎Anode
Item Dimensions LxWxH ‎7.75 x 6.67 x 4 inches
Item Package Dimensions L x W x H ‎6.8 x 5.8 x 3.3 inches
Manufacturer ‎Quicksilver
Material ‎Various Materials
Model Name ‎822777Q1 Aluminum Trim Tab Anode - Mercury or Mariner Outboards and MerCruiser Stern Drives Using High Rake Propellers
Number of Items ‎1
Package Weight ‎0.36 Kilograms
Part Number ‎822777Q1
Size ‎Unspecified
Suggested Users ‎Boat Engine Parts and Accessories

3.5

13 Review
5 Star
74
4 Star
12
3 Star
6
2 Star
2
1 Star
7

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: jim
Its beuatiful
Scritto da: wyatt
Finally I found it somewhere
I dont know why but I was unable to find this at my local marine store. Glad I was able to find it online. I needed a trim tab anode that was both set back (for prop clearance) and full length (for added stability) and this item fit the bill! I tried using a flat anode but had too much torque steer, I tried using a set back trim anode but it didnt have enough material to combat the torque steer. This product was the answer, both set back and full size. Installed on my Mercruiser Alpha 1 Gen 2 outdrive. It came with the bolt with thread locker already on it. Only problem is that it only comes in aluminum so I had to swap out the rest of my anodes from zinc to aluminum.
Scritto da: Alan Bailey
Nice
Exactly what I ordered, exactly what I needed. Very high quality.
Scritto da: SG
Quicksilver for the win once again.
Excellent purchase! Looks better quality than OEM. This was fitted to a 1998 Mercury V6 150 and only modification I had to do was grind off a little material for clearance of my rear bolt through my housing which is mainly due to the reason that I run a lower unit extension plate because I swap out prop and jet pump from summer to winter times. Same day shipping was available and would buy again.
Scritto da: John
Well made
Like most things from quicksilver this is another quality product
Scritto da: Ron
Easy to install and if you have a slow speed wander on your runabout, this helps a lot!
We have a 2050 Sea Ray bow rider that really likes to wander at slow speeds. Irritating when in channels with lots of boats or at multiple launch ramps. We went from a 3 blade to a 4 blade and that helped along with this skeg. The original trim tab was flat, no fin, so this helped. We haven't tried off setting it yet, it seems to me on our other boats they were always offset instead of straight out the back. Time will tell as I fool around with it.
Scritto da: Stephen G Cox
Had a flat anode and switched to this to improve slow speed prop walk.
My sterndrive bowrider has the absolute worst slowspeed prop walk. Its a struggle to point straight in a no wake zone. This season, I went after the problem... I replaced the 21 pitch SS 3 blade prop with an alum 21 ptch 4 blade prop and put this finned anode on the sterndrive in place of the stock flat one. PROBLEM SOLVED! It was a combination of replacing both the anode and the prop that addressed the issue to a satisfactory level. The 4 blade prop required this offset fin anode. All sterndrives walk at no wake speeds, but now its manageable.
Scritto da: David Walker
Did exactly what it was supposed to do. Had ...
Did exactly what it was supposed to do. Had purchased a new prop, that, while it was the listed size for my boat, it hit the old trim tab. In further reading the directions, there was a note on mercury outboards, that if the prop hit the trim tab, buy this one. I did, it worked, what more can be said about an anode? Fit my '83 Merc 80hp. Likely fits several other years as well
Scritto da: roscoe
Alpha 1
1990 alpha 1 leg fit good
Scritto da: Amazon Customer
fin
great product
Scritto da: Shawn
Exactly what i was expecting
Fit my Alpha 1 leg and made room for the 4 blade prop
Scritto da: andre
bien
parfait pour corriger
Scritto da: Dan
????
Exactly as expected, fast shipping

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array