Pyle Meters Rörklämma temperatursond Verktyg-Typ-KRörklämma Adapter Termoelementsond för extern mätare eller mätare som digitala multimetrar och klämmätare, mäter temperatur PCTL01, orange

Name: Pyle Meters Rörklämma temperatursond Verktyg-Typ-KRörklämma Adapter Termoelementsond för extern mätare eller mätare som digitala multimetrar och klämmätare, mäter temperatur PCTL01, orange
Brand: Pyle
SKU: 7241871048477
Price: 653.22 SEK
Availability: InStock

Brand:Pyle

3.2/5

€
653.22

PRODUKTBESKRIVNING Westbrass 2-½ tums duscharmsfläns med Sure-Grip ger en perfekt touch till alla installationer. Dess lågmönstrade Sure-Grip-fläns passar 1/2 tum IPS duscharmar. 13/16 OD av mitthålets öppning. Den är stålstansad och pläterad och har en 2-1/2 tum. Ytterdiameter för att täcka eventuella luckor i väggen och har justerbara pinnar för en säker anslutning. Finns i en mängd olika stilfulla ytbehandlingar, den här artikeln kommer säkerligen att komplettera dina befintliga armaturer. Se till att kolla in våra andra modellstilar och BESÖK VÅR VARUMÄRKESBUTIK för fler köks- och badrumsartiklar för att styla ditt hem med praktisk funktionalitet och skönhet. FRÅN TILLVERKAREN Westbrass grundades 1935 av två bröder, Jack och Aaron Kagan, för att tillgodose behoven hos alla VVS-grossister på västkusten. Produktlinjerna på den tiden inkluderade artiklar som kranar, ventiler, formbara armaturer, etc. Efter att ha blivit den främsta distributören av VVS-produkter köptes företaget 1985 av Max Homami. Efter att ha sett en boom inom hemförbättringsindustrin hade Mr. Homami en vision att göra Westbrass till ledaren inom köks- och badtillbehör. Företaget tillverkar för närvarande sina egna produkter gjorda av material av högsta kvalitet. För att säkerställa excellens i branschen är dessa produkter gjorda för att klara de mycket stränga kraven i NSF, IAPMO, ADA och många andra bestämmelser. Det Los Angeles-baserade företaget säljer nu ett brett utbud av VVS-specialprodukter, badavfall och översvämningar, samt dekorativa köks- och badtillbehör över hela världen. Westbrass har flera patenterade föremål, inklusive Deep Soak Overflow designad för extra djup blötläggning i de flesta badbrunnar, Closing Linear overflow och flera andra intellektuella egenskaper. Kundbasen inkluderar utställningslokaler för kök och bad, VVS-grossister och leveranshus, OEM- och ODM-företag, samt flera nationella hemcenter.

Belopp

Lägg till i kundvagn Köp nu

EAN: 7241871048477

Kategorier Verkyg & hemförbättring, El & handverktyg, Arbetstagning, Handverktyg, Klämmor, Rörklämmor,

ROLIGFRI SHOPPING: Med Pyle PCTL01 Pipe Clamp Temperature Probe är vi säkra på kvaliteten på vår produkt, därför erbjuder vi en 30 dagars pengarna tillbaka-garanti utan några frågor. KOMPAKT DESIGN: Den robusta kompakta designen möjliggör en säker anslutning även i trånga arbetsytor plus att den enkelt kopplas till din mätare. Har 1 ⅜ tum (6,5 cm) klämkäftöppning med 40 tum eller 102 cm sladdlängd. BREDA TEMPERATUROMRÅDEN: Den har en driftstemperatur på 40 till 392 grader Fahrenheit (-40 till 200 grader Celsius). Rörklämman är termiskt isolerad från omgivningstemperaturer för att bevara temperaturnoggrannheten. LÄTT GREPP: Rörklämmans adapter är ett termoelementtillbehör utformat för att enkelt greppa rör för snabb temperaturavläsning. Har fjäderbelastad käft för ett säkert grepp. Den är för användning med alla termometer eller multimeter med en typ K termoelementingång. UNIVERSELL ANVÄNDNING: Pyle Pipe Clamp Temperature Probe klämmer fast på röret för att mäta temperaturen. Designad för att ansluta till extern mätare eller mätare. Fungerar med alla Pyle och andra märken digital multimeter och klämmätare som mäter temperatur.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Pyle
Color	‎Orange
Customer Reviews	4.2 4.2 out of 5 stars 544 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.02 x 3.15 x 5.12 inches
Item model number	‎PCTL01
Item Package Quantity	‎1
Item Weight	0.01 Pounds
Item Weight	‎0.16 ounces
Manufacturer	‎Pyle Meters
Part Number	‎PCTL01
Product Dimensions	‎1.02 x 3.15 x 5.12 inches
Style	‎Digital,Compact
Warranty Description	‎One Year Limited

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Michaela A. Nufer

Accurate Readings

tested with fieldpiece meter and was spot on at 32 degrees. did have to file the prongs to fit fieldpiece but for the price no big deal for me. i am ordering another and will keep posted next time i do ac testing.

Scritto da: GLIverson

For the money, this is a very good choice.

I tested the new unit I just received yesterday. I used two other type K thermocouples to see it it was accurate or to at least see just how close they compared to each other..... they all came to within +/- 0.1*F. That is not bad for this price. The Good: 1: The actual unit seems to look a bit better in quality and materials used than the photos give it credit for...... it is a good looking piece of equipment. 2: It seems to be very accurate for an instrument of this price range too. 3: It does not seem to be too easy to break. Good quality materials in general. The Cons: 1: In big letters it says it is China made, not Taiwan or others of better origins and quality. 2: Basically, after the Amazon 30 days warrantee, I would not expect anything else to follow. 3: I do NOT wish to test it to failure, but, it does look like you could break the plastic joint without much effort if you try to use it on something just a bit too large. Like if you were to push to fit or try to spread it just a tad too wide. (Merely be a bit more careful.) 4: Most of us want to clamp this on a smaller pipe or copper tubing,... like say a 3/8" copper tubing condenser outlet, but it does not like smaller sizes too much and wants to slip off point. (Even so, I did make it work, it took just a tad bit of extra care and effort to make it work, and it did just fine! I am glad I have it.) So, unless you are willing to spend at least $50+ for a better one, with a little care, I would hazard a guess that this will serve you well and with a little extra care, it may last a long while doing it too! Enjoy!

Scritto da: Maracuja

Klein clamp dupe/knockoff

Exact component as Klein brand k-type thermocouple clamp. Both feel super cheap. Tested against klein and Fieldpiece - TC24. The klein was inconsistent on temps and this "Pyle brand" knock off of Klein was degree for degree to Fieldpiece - TC24 at $75. Save yourself $50 and buy the Pyle, out the box it will work, not sure on longevity.

Scritto da: Chris82

Worth the $15

A co worker and I bought one of these about 3 weeks ago, We are service techs for a hvac company in Iowa. Mine is still working, my co workers busted the plastic at the hinge. Most likely from being shut in his van door :/ but any ways. Here are my thoughts on it. The plastic and spring seem solid, No troubles with the plastic or spring yet and it's used on a daily basis. The type k plug is made of a fairly cheap metal and bends easily. The wire which connects to the sensing pad is not secured to anything on the clamp, other then the solder on the pad. I've added some security to it by adding a zip tie to the wire to insure its not pulling on the soldered wire end. Other then that I'd say worth the $15. Not sure if spending an extra $20-30 on a name brand will gain you much. If this one breaks soon I may try a more expensive one, but it shows no signed of failing soon.

Scritto da: Joseph Scott

I received two of these pipe clamps and tested them ...

I received two of these pipe clamps and tested them in both ice and boiling water on my Fieldpiece ST4. They were both off by a few degrees. I calibrated the ST4 to correct this but it's not possible to get an accurate calibration for both cold and hot water with the same clamp. It seems the thermistor used does not have the dynamic range accuracy of the comparable Fieldpiece components that cost four times more. If I keep these, I will mark one with blue tape for the suction line and use the other for the liquid line, then calibrate each clamp for cold and hot respectively to improve their performance. Also, as others have mentioned before, the connector prongs are slightly curved and fit a little too tightly into my Fieldpiece.

Scritto da: Ryan A.

This product has a little bead thermocouple soldered or glued ...

This product has a little bead thermocouple soldered or glued on the inside of a metal plate attached to the clamp. This means its measuring the temperature of the pipe through the thermal conductivity of the piece of metal directly in front of the bead. The grip strength of the clamp is weak and moves around when measuring vertical line sets knocking out of alignment the bead thermocouple. The temperature was warmer by 2-3 degrees in a cup of ice water when my other probes are spot on. For a student in HVAC working on equipment in a community college you really cannot beat the price when compared with some of the bigger names. For the field, I won't be purchasing another one of these.

Scritto da: fld1apple

so far so good just got it

feels cheap and not very durable but it is accurate i compared it to my other testo set up so its accurate just feels very cheap and not durable

Scritto da: David Moore

Pyle Clamp Temperature it’s the Best

The Pyle Clamp Temperature Probe is the only Temperature device that will let you see the true temp on a copper line for reading the A/C condenser temperature so I could charge the System correctly. You HVAC guys out there using just a temp probe, it touches both the pipe and the insulation and it will not let you get a true reading. The pipe clamp reads only the pipe temperature.

Scritto da: Kerr Ingram

One Star

Not accurate AT ALL, usless for taking pipe temperatures

Scritto da: vszeto

Accurate reading for the price, within +/- 1deg C, Good build quality on the clamp, feels sturdy

Accurate reading for the price, within +/- 1deg C, Good build quality on the clamp, feels sturdy. Tested with boiling water and an ice cube. Like any temp probe it will be slightly affected by surrounding conditions, no temp reading is perfect. Used it for AC line temp to get a reading for the super heat. Worked well

Scritto da: isaac Gillespie

Dont use for HVAC...

Ordered this anticipating it wouldn't last very long, but would least get me through a few jobs.. not even.. !! Didnt work out of the box. Gave me crazy readings and then stoped working. DONT buy for HVAC.. sensors will not hold up on the tiny little spot weld on this very cheep thin metal. However it maks a nice clamp..

Scritto da: ryan

They were cheap, and for a good reason

They are not as accurate as I had hoped. There is usually a few °F difference found between the two I ordered.

Scritto da: Norman R.

Decent Value

For the price is a decent item. Occasionally I have to adjust it to get an accurate reading.