Protoco 3010 Standard 15-delat skiftnyckelställ, verktygsorganisator för verktygslåda, verktygsvagn eller väggmonterad, svart 15-delad svart

Name: Protoco 3010 Standard 15-delat skiftnyckelställ, verktygsorganisator för verktygslåda, verktygsvagn eller väggmonterad, svart 15-delad svart
Brand: Protoco
SKU: 0720012030108
Price: 503.61 SEK
Availability: InStock

Brand:Protoco

3.5/5

€
503.61

Uppdatera din verktygslåda eller verktygsvagn och håll dina verktyg organiserade med Protoco's Wrench Rack (The Original!), tillgänglig i 12 eller 15 delar, standard eller omvänd. Vägguppsättning är också ett alternativ för att hålla dina skiftnycklar snyggt organiserade. Länge borta är de dagar då man letar efter en skiftnyckel i specifik storlek längst ner i din verktygslåda, eller går igenom låda efter låda med upphopade skräp. Med Protoco Wrench Rack är dina verktyg alltid inom din siktlinje, vilket gör det enkelt att hitta rätt skiftnyckel för jobbet, oavsett vad jobbet kan vara. Vårt skiftnyckelställ, tillgängligt i en mängd olika färger, anpassar sig enkelt till atmosfären på din arbetsplats och blir sömlöst en del av den.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0720012030108

Kategorier Verkyg & hemförbättring, El & handverktyg, Verkstadsförvaring, Tool Boxes,

Om Protoco: Protoco tillverkar skyddsöverdrag, formsprutade plastprodukter, fluidiserade pulverbelagda produkter, beläggningar, marina produkter och anpassade förpackningar, allt stolt Tillverkat i USA sedan 1977. Mångsidigt: Passar både SAE och metriska skiftnycklar, och rymmer skiftnycklar från 1 /4 till 1 och 6 mm till 24 mm; Perfekt för ditt nuvarande skiftnyckelset och för att sätta upp en ny också! Den är också designad för att passa alla dina skiftnycklar i en 1-tums låda i din verktygslåda eller vagn. Mycket hållbart: Tillverkat av plastmaterial med hög densitet, vilket ger hållbarhet, slagtålighet och lång livslängd; En verktygsarrangör som kommer att vara en del av din installation i många år framöver, uppbackad av Protoco-kvalitet och Made in the USA!. Lätt att montera: Detta skiftnyckelställ kan också installeras enkelt, och om du hänger dina verktyg på väggen håller du dem inom din siktlinje, så att du snabbt kan identifiera rätt skiftnyckel för jobbet; Spara den tid som skulle vara bortkastad på jakt efter rätt verktyg och få dina projekt gjorda snabbare!. Överlägsen organisation: Håll din verktygslåda organiserad och sluta slösa tid på att leta efter skiftnyckeln du behöver; Vår skiftnyckelhållare i 12 eller 15 delar håller dem alla organiserade och tydligt i sikte istället för att flyta runt i en låda, redo att användas när du behöver dem.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Protoco
Brand	‎Protoco
Color	Black
Color	‎Black
Customer Reviews	4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Head Style	‎Box End
Included Components	‎Wrench Rack
Item Dimensions LxWxH	11.75 x 7.13 x 1.13 inches
Item Dimensions LxWxH	‎11.75 x 7.13 x 1.13 inches
Item model number	‎3010
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	‎0.353 ounces
Manufacturer	‎Protoco
Material	Plastic
Material	‎Plastic
Operation Mode	‎Mechanical
Part Number	‎3010
Product Dimensions	‎11.75 x 7.13 x 1.13 inches
Size	‎15-Piece

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Shopping Guy

Best rack if you don't need to captivate your wrenches to carry them around

This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.

Scritto da: ED

Good rack, nice quality

These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.

Scritto da: Warren and Christine

Standard

Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.

Scritto da: RB211

Perfect For Drawer Use

Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.

Scritto da: Wesley Schaefer

Cheap 3d printed

They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.

Scritto da: JerseyBoy0034

Yes please

These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.

Scritto da: Chris A.

... this is the only one that is worth a crap. I wish they made version with one straight ...

I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.

Scritto da: Gary Barrentine

Does a good job.

Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.

Scritto da: Tim

excellent

Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.

Scritto da: Mark T

The best wrench racks!

Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.

Scritto da: Mark T

Best wrench racks!!

Scritto da: Amazon Customer

Not sure why one picture says magnetic, because it is not.

Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.

Scritto da: Uncle Evil

Original Wrench Racks for a good price. Wish I could buy the reverse version ...

Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .