Precision Shim Plattbricka för yttre lageravstånd, 18-8 rostfritt stål, rund form, USA-tillverkad, 0,206-0,211 ID, 0,305-0,310 OD, 0,003 Tjock (förpackning om 25) 3/32 x 5/6-. 211 tum 0,31 tum ,003 tum 25

Name: Precision Shim Plattbricka för yttre lageravstånd, 18-8 rostfritt stål, rund form, USA-tillverkad, 0,206-0,211 ID, 0,305-0,310 OD, 0,003 Tjock (förpackning om 25) 3/32 x 5/6-. 211 tum 0,31 tum ,003 tum 25
Brand: Small Parts
Price: 297.62 SEK
Availability: InStock

Brand:Small Parts

3.6/5

€
297.62

Tillverkad i USA för utmärkt kvalitetsöverensstämmelse. Precisionsmaskineri, teknisk instrumentering, prototyper, modelltillverkare, kraftöverföring. 18-8 rostfritt stål är det vanligaste korrosionsbeständiga rostfria stålet som används i platta brickor. Designad för att skydda den yttre lagerbanan eller för en specialdimensionerad platt bricka. Shim-brickor tillverkas med extremt snäva tjocklekstoleranser så att de kan användas för att göra en exakt dimension.

Belopp

Lägg till i kundvagn Köp nu

EAN:

Kategorier Industri & vetenskap, Spikar, Skruvar & Fästelement, Växlar, Platta brickor,

Country of Origin	USA
Exterior Finish	Stainless Steel
Fastener Size	3/32"
Item model number	Z9883-3
Manufacturer	Accurate Manufacturing
Material	18-8 SS
Outside Diameter	0.31 Inches
Package Dimensions	2 x 1 x 0.5 inches; 0.16 Ounces
Washer Type	Flat

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Chris

Product as described specs were dead on

I purchased this set of washers to shim a rifle scope mount that was giving me trouble to zero due to not having enough elevation adjustment. due to the consistent/thin size of the washers it was easy to space the scope up until it was perfect with the scope optically centered at 100 yards. I checked a few of the washers with a pair of calipers. All of the ones I checked were dead on. The only thing keeping it from a 5 star was the packaging of the actual product. It's just in a little plastic bag (heat sealed) and a few of the washers came bent. For this application that wasn't a huge deal to me but if you care that they are perfectly flat its going to be hard to keep a 0.001" thick washer flat in a plastic bag.

Scritto da: SG

Good stuff

Fast ship works well for my turbo wastegate. Would be great if sold as a kit w var sizes

Scritto da: JGAlaska

Perfect fit and much lower cost.

These shim washers were exactly what I needed and the price was 70% less than I found anywhere else.

Scritto da: R&R

High quality m. Accurate dimensions.

Successfully use these to shun several parts, including and upper and lower. They reduced the play significantly on multiple projects. Couldn’t find these sizes anywhere else as fast as I could on amazon. Totally awesome! Would recommend!

Scritto da: Richie F.

Good for muzzle attachments

If you are looking to adjust the rotation of a muzzle attachment with a 1/2-28 thread that seats flat on the barrel, this is what you are looking for. Like when the porting on the attachment is supposed to point in a specific direction, like on a compensator or brake, and does not point in the correct direction when torqued down. A 28th of an inch is 36 thousands of an inch, so a 1 mil thick washer adjusts by 1/36th of the rotation or 10 degrees. It is 13 degrees on a 1/2-36 thread.

Scritto da: Chris Newcomer

Precision

What can I say. It's a washer.... The .005" spec measured a true .005". Can't get much better than that. If you're using these to shim AR15 receivers, you might want to also get the .003" shims.

Scritto da: russ riedel

great

perfect for muzzle device shims, more cost effective than shim kits if you use enough of them.

Scritto da: John

Five Stars

Exactly what I needed. Measured exact with my calipers.