POWERTEC 110090 4 x 24 tums slipband

Brand:POWERTEC

3.4/5

€
560.47

Vi presenterar 4" x 24" 80 Grit aluminiumoxidslipband från POWERTEC. Detta premiumpaket med 10 st har utformats för att ge dig en kostnadseffektiv uppsättning långvariga och högpresterande slipband. Tillverkade med aluminiumoxid (A/O) korn med öppen beläggning, fungerar de som ett mångsidigt verktyg som bäst används för träslipning, formning, skalning och ger en jämn finish till många av dina träbearbetningsapplikationer. Dessutom fungerar dessa bälten exceptionellt bra med lättmetaller och icke-järnmetaller, blandningssvetsar, glasfiber, plast och gummi. Varje bälte har en X-vikt klädd baksida och har en stark harts-på-hartsbindning med välgjorda sömmar för långvariga resultat. Oavsett om du är en professionell eller gör-det-själv-typ kille, är dessa kraftiga slipband kompatibla med många av dina gå till slipmaskiner, inklusive: Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo och mer!Specifikationer: Slipbandsstorlek: 4-tums x 24-tums Grit-storlek : 80Material: Premium Open Coat Aluminiumoxid (A/O) GrainBacking: Stark "X"-vikt Tygbaksida Led: Stark stumfog Konstruktion Paket: 10 stycken Grit Val Guide:• 40 – 60 Korn: Kraftig slipning och skalning• 80 – 180 Grit Tiny imperfections• 240 – 400 Grit: Levererar en superfin jämn finishPOWERTEC är en professionell tillverkare av högkvalitativa träbearbetningsmaskiner, träbearbetningstillbehör och ett brett sortiment av OEM-ersättningsdelar. Vi är fast beslutna att överträffa förväntningarna, samtidigt som vi tar med de bästa innovationerna, teknologierna och produktutvecklingen till branschen.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0736815007018

Kategorier El & handverktyg, Elverktyg & Tillbehör, Elektriska efterbehandlingsverktyg Delar & Tillbehör, Powerslipardelar & Tillbehör, Bälten,

GRIT: Finns i ett brett utbud av uniformerade grit - 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400 grit. HANTVERK: Dessa 4"x24" slipband har ett värme- och fuktbeständigt material och designades med sakkunnigt utformade sömmar som inte går sönder under tryck. PREMIUM GRADE: Tillverkad med vår överlägsna X-Weight klädda baksida, en öppen beläggning av aluminiumoxidkorn och en imponerande harts på hartsbindning som säkerställer långvarig prestanda. ANVÄNDNING: Fungerar med ett sortiment av bandslipmaskiner och applikationer – ger ett kraftigt avskalnings- och slipverktyg för trä, aluminium, glasfiber, gummi, plast och icke-järnmetaller.

Amperage Capacity	11 Amps
Amperage Capacity	‎11 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Brand	‎POWERTEC
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 740 ratings 4.3 out of 5 stars
Grit Number	80
Grit Number	‎80
Grit Type	Medium
Grit Type	‎Medium
Included Components	‎POWERTEC 110090 4 x 24" Sanding Belts \| 80 Grit Aluminum Oxide Sanding Belt \| Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10 x 4 x 4 inches
Item Dimensions LxWxH	‎10 x 4 x 4 inches
Item model number	‎110090
Item Package Quantity	‎1
Item Weight	‎1.5 Pounds
Manufacturer	‎POWERTEC
Material	‎Aluminium
Part Number	‎110090
Product Dimensions	‎10 x 4 x 4 inches
Size	‎80 Grit

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Randy Browning

Can’t speak to longevity, but they work.

I’ve used one of the 40 grit belts, so I’ll generalize in this review. I purchased a Bauer 10amp 4x24 belt sander from Harbor, and these fit perfect. I’m working on a sap filled 16” pine disk so the medium causes the belt to gum up (it would not matter what belt you use), but it cleans up well by using a brass wire brush on the belt while running the sander. The finer the grit the more it will clog, but again that’s with any belt. The paper track material is thick and does not show any signs of separation, and the 4” width helps it track straight. The cost per belt is less than half of any big box belt, and only 70% of the offerings at Harbor, which were thin and no where near the accurate grit density.

Scritto da: Amazon Customer

Update after I use

Received on time. Have not used yet but seem to be well made. Will update after I use

Scritto da: jon fredricks

good service

good quality and price

Scritto da: D Lee

Belts Break!!

Poor seams!! Every belt used (4 in all) broke after several minutes of deck sanding with a Makita sander. On the 4th try I had to disassemble the sander to remove the broken belt. Upon closer inspection it is obvious that the seam tape is failing. See photo. Clearly this is a faulty design that has not been adequately tested by the manufacturer. My remaining belts will be trashed.

Scritto da: Warren Y.

solid sandpaper

I used this sandpaper to sand down uneven transition height between sheathings in a mobile home subfloor. The sandpaper is strong and i only used up 3 of these for the entire mobile home. One thing i learned is that if you're looking to take down surface quickly on plywood... go with a 60 or 36 grit paper. 80 is still too fine to take down uneven surface quickly. You'll be there all day although at the end of the day, the job actually gets done.

Scritto da: fishing buddy

Look good.

They look, were shipped promptly. Priced right. I just have been too busy to try them out. Want to work on half log benches stained and coated with epoxy. Used for the first time yesterday, work great.

Scritto da: Tandy Norris

They eat wood as they should.

They work great on my belt sander.

Scritto da: andres cardenas

Very week glue

I sand around 70-100 cabinet doors a day, and these sanding belts only lasted 7-13 doors per belt. I would imagine they would be amazing once you break in the belt, but you won't get to that point.

Scritto da: Vic

Works very well. Did the job I needed it to.

Have a small woodworking shop in my garage my wife and I make different things out of wood. The sandpaper came in very handy works well fits good on the machine. Longevity is OK. Value is good. Did what I needed it to do and I’m still using them.

Scritto da: Hyrule Cofee

Inconstant quality

I bought 4 packs of those sand belt. 2/4 of them was ok and does a great job. The 2 others broke after 5 minutes of sanding. The blue junction between ends is weak for them. So you get a chance of a good or really bad belt.

Scritto da: n

Don't buy these Sanding belts

They work for a while, but fall apart (catastrophically) within a few minutes of use. Other brands do not, so its not the fault of the sander. The belts start to come apart and tend to jam the sander. Do NOT use these. I tried to return an unopened package, but was (sadly) 2 days late and the return window is closed. I will never use Powertec products again.

Scritto da: Jorge Adrian Fernandez Campos

Muy mala calidad

Que lastima de la calidad del producto, llego en tiempo y el precio muy accesible pero lamentablemente al utilizar las bandas se despegaron de inmediato, no duro ni tres minutos de uso y se despegaba, utilice otra para ver si era un defecto en esa unidad, pero al parecer el pegamento no tiene la adherencia necesaria y se despega, lo cual puede ocasionar un accidente a quien está manipulando la lijadora

Scritto da: Chris R.

Garbage, never had so many belts break so quickly.

These belts are garbage and do not last more then 10 mins before snapping. I even went out and bought a quality belt to test my Sander before posting this. It worked perfect for 30 mins, put another on of these back in and snapped in less then 10 mins.