0
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister
0

Total:€ 0.00

Se varukorgKolla upp
LoginRegister

MAGID Olje- och vätskeabsorberande nivå A4 Skärbeständiga arbetshandskar, 12 PR, med avancerad komfort och kylning, TriTek Coated, Storlek 9/L, Återanvändbar, 13-Gauge DX Technology Stålfri kärna (DXG48) Palmbeläggning 9/L 12 par

Brand:MAGID

3.5/5

€
2741.06

Kan tvättas i maskin för längre livslängd. ANSI nivå A4 skärmotstånd, ANSI nivå 6 nötningsmotstånd och ANSI nivå 3 punkteringsmotstånd. Färgkodad överkastning hjälper dig att identifiera storlek och minskar fransning. Shield-grafiken är färgkodad efter skärnivå för att enkelt identifiera skärskydd på avstånd. Färg med hög synlighet förbättrar skyddet i svagt ljus. TriTek palmbeläggning stärker greppet och minimerar mättnad av tung vätska och olja. 13-gauge DX Technology-konstruerat garn ger extrem komfort som är 20 % lättare än en traditionell HPPE med samma skärnivå. DX-tekniken känns sval vid beröring och håller dig bekväm hela dagen. DX Technology kärnlös konstruktion utan obehag i samband med glasfiber eller stål.

Belopp
Lägg till i kundvagnKöp nu

EAN: 0049704034171

Kategorier Verkyg & hemförbättring, Industri & vetenskap, Safety & Security, Personlig skyddsutrustning, Hand- & armskydd, Lab, Säkerhets- och arbetshandskar, Skärande handskar,

Kan tvättas i maskin för längre livslängd. ANSI nivå A4 skärmotstånd, ANSI nivå 6 nötningsmotstånd och ANSI nivå 3 punkteringsmotstånd. Färgkodad överkastning hjälper dig att identifiera storlek och minskar fransning. Shield-grafiken är färgkodad efter skärnivå för att enkelt identifiera skärskydd på avstånd. Färg med hög synlighet förbättrar skyddet i svagt ljus. TriTek palmbeläggning stärker greppet och minimerar mättnad av tung vätska och olja. 13-gauge DX Technology-konstruerat garn ger extrem komfort som är 20 % lättare än en traditionell HPPE med samma skärnivå. DX-tekniken känns sval vid beröring och håller dig bekväm hela dagen. DX Technology kärnlös konstruktion utan obehag i samband med glasfiber eller stål.
Brand MAGID
Color Palm Coating
Material High Performance Polyethylene
Size 9/L
Special Feature Lightweight, Abrasion Resistant, Palm Coated, Cut Resistant, Breathable

3.5

8 Review
5 Star
70
4 Star
18
3 Star
0
2 Star
13
1 Star
0

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Bacchus
My Hands Finally Feel Safe
Disclosure: This was sent to me for free via the Vine program. I did not receive monetary compensation to write this review, just the product itself. I've been doing a lot of tool restoration lately and that involves refinishing a lot of bladed items. Nothing says a good time to ol' Bacchus here than fiddling around with rusty sharps! But seriously, I do enjoy salvaging tools and equipment destined to be melted down, fixing them, and using them again. As a certain someone would say, it spark joy. What I DON'T like is the ever present fear of absolutely slam-jamming a pruner blade into my hand. That does not spark joy. Of any kind. So when these became available, I made the (for the first time ever) prudent decision to offer my hands some protection. And it's been great. These puppies are real rough and tumble customers that can take a beating. I've been restoring an old hatchet and I can just palm the edge with no problem. It's not SHARPENED yet but still, I feel confident in my grip and my safety to do so. And it's made restoring tools easier, too. These things absorb liquids and oils which is great for stuff caked in lubricant...but also for when my hands get sweaty. Which isn't often because these things breathe so well I think they may be sentient. They're like the Sorting Gloves, or something. And the grip coating really lets you get a purchase on things the way others just...couldn't. With other gloves, it's felt like the coating shifts with the fabric but with these the fabric doesn't shift at all because that coating is lodged in there REAL good. So, would I recommend them? Yup. Even for the price tag ($14.70 at time of writing on 6/7/22), they're worth it. You only get two hands in life. So don't be like Job. Protect your hands. And don't go swimming in the ocean.
Scritto da: Steve K
Good for working outdoors
I use these all the time now. I used to use the old school leather work gloves, but I wanted something I could handle more delicate stuff with or at least more precision so I got these. So far they're great - they're a bit tight fitting but - they've been excellent for gardening or mowing the lawn. These are my go-to pair now for when I'm doing stuff outside.
Scritto da: S Howard
Not bad for changing car oil
Keeps hands clean and dry. We like that the rubber coating is higher up on the top of the gloves. This provides cleaner work experience with dirty, oily work.
Scritto da: Drei
Safety First
I tend to get cuts or at least scrapes/scratches on my hands whenever doing any work on my car, and these gloves have helped reduce that slightly (mostly because I actually want to reach for them when working). Gloves I typically use include: - rubber/nitrile - great against liquids, but tear too easily (I may need to try some thicker, more heavy duty ones) - leather, with reinforced/padded knuckles - protective, but bulky - coated gloves (bulk) - sometimes hit or miss, but are generally good enough for carrying objects without very sharp edges, and for basic multi-purpose use, including gardening Here are some of my thoughts on these gloves so far: - I ordered based on the sizing guidelines provided, and the fit was spot on. - The coating is grippy and flexible - it moves very well with my hand. - The fabric seems to breathe well. - I had initially wondered whether 13 gauge would be too thick, but this has not been an issue at all. - compared to the other kinds of gloves mentioned above, this pair from MAGID is move versatile than all 3, but it likely would not provide as much protection as the leather gloves with reinforced knuckles
Scritto da: Dee
Nice
I work on car and it feel food to have them on
Scritto da: BrewCityRider
Cut & liquid resistant general purpose gloves
At first glance these look like your typical rubber over-molded work gloves. These are a step above those gloves however, as they are ANSI A4 rated cut resistant gloves. That means that there are able to resist medium cut hazards of 1500-2199 grams of force. This is right about the middle of the ANSI scale. The rating is clearly and colorfully noted on the backside of the glove. You can see the upgraded material that this is made out of on a couple of my pics of the insides of the gloves. One slightly confusing aspect of these gloves is in the title of the ad stating that they are "oil & liquid absorbing." In fact what they really mean is quite the opposite of that. They are oil and liquid RESISTANT due to the rubbery overmolding. These D-ROC gloves are made true to size. I got the size large to fit my wife who wears a large glove, and these fit perfectly. I have an extra large hand and these gloves do not fit me. So, order your normal size in these gloves. I can't speak to the durability yet, but I have been impressed with the quality and features of the D-ROC gloves so far. They look to be a good bargain at the price being charged for an A4 cut resistant glove.
Scritto da: AmazingGrace
Nice work gloves
These work gloves for well (true to size). They are comfortable and are great to protect your hands from oils, chemicals and other potentially harmful agents. These can also be used for working in the yard as well. Only time will tell about the longevity and durability of these gloves, but so far, I’m impressed. See my pictures for details. Thank you for reading my review.
Scritto da: Dame Droiture
Comfortable, sturdy, and safe feeling
These work great for all sorts of projects. I mainly use them for gardening -- the rubberized hand area doesn't let moisture soak through, and it also doesn't allow thistles and stickers to get caught on the gloves -- but I also use them for more esoteric hobbies, like flintknapping, which poses serious dangers from cuts to the fingers. The gloves are comfortable and sturdy, and feel very safe. My favorite feature is the extra layer of rubber (with grooves for extra stretching) in the area between the thumb and forefinger.

Relaterade produkter

hot
Magid D-ROC DX Technology Polyuretan Palmbelagda Skärbeständiga Arbetshandskar Orange 9/L 12 Par
0.1/5

€ 2541.09

Magid D-ROC DX Technology Polyuretan Palmbelagda Skärbeständiga Arbetshandskar Orange 9/L 12 Par
0.1/5

€ 2541.09

hot
DayMark Safety Systems 14 Skärtåliga ånghandskar, medium, (par) (IT113513) Medium (förpackning med 1) 14
3.5/5

€ 567.61

DayMark Safety Systems 14 Skärtåliga ånghandskar, medium, (par) (IT113513) Medium (förpackning med 1) 14
3.5/5

€ 567.61

hot
Ergodyne unisex vuxen Skärbeständig - A3, 13g ANSI A3 PU-belagda CR-handskar, Grå, Large US
3.5/5

€ 347.36

Ergodyne unisex vuxen Skärbeständig - A3, 13g ANSI A3 PU-belagda CR-handskar, Grå, Large US
3.5/5

€ 347.36

hot
SHOWA KV660 Atlas helbelagd PVC-handske, sömlös Kevlar-foder, skärtålig, X-Large (paket med 12 par)
0.1/5

€ 2664.71

SHOWA KV660 Atlas helbelagd PVC-handske, sömlös Kevlar-foder, skärtålig, X-Large (paket med 12 par)
0.1/5

€ 2664.71

hot
Radians RWG532 Pekskärm Skärskyddsnivå A2 Arbetshandske Medium (paket med 1)
3.6/5

€ 512.31

Radians RWG532 Pekskärm Skärskyddsnivå A2 Arbetshandske Medium (paket med 1)
3.6/5

€ 512.31

hot
MAGID vattentät nivå A4 skär- och kemikaliebeständiga arbetshandskar, 12 PR, förbättrat grepp Sandy Nitril Coated (Nitrix), Storlek 11/XXL, Återanvändbar, 13 mil tjocklek, Hyperon Shell (GPD484) Blå 11/XXL 12 par
0.1/5

€ 5077.83

MAGID vattentät nivå A4 skär- och kemikaliebeständiga arbetshandskar, 12 PR, förbättrat grepp Sandy Nitril Coated (Nitrix), Storlek 11/XXL, Återanvändbar, 13 mil tjocklek, Hyperon Shell (GPD484) Blå 11/XXL 12 par
0.1/5

€ 5077.83

hot
Ergodyne ProFlex 7551 Vattentäta vinterarbetshandskar, skärtåliga ANSI A5, sandiga nitrilbelagda handflator, termiskt fleecefoder Orange Large (Pack med 1)
3.2/5

€ 398.43

Ergodyne ProFlex 7551 Vattentäta vinterarbetshandskar, skärtåliga ANSI A5, sandiga nitrilbelagda handflator, termiskt fleecefoder Orange Large (Pack med 1)
3.2/5

€ 398.43

hot
Ergodyne ProFlex 7025 Skärbeständiga arbetshandskar, ANSI A2, PU-belagda handflattor för flexibelt halkfritt grepp, nötningsbeständig, överlägsen passform och känsla, 18g
4.1/5

€ 354.19

Ergodyne ProFlex 7025 Skärbeständiga arbetshandskar, ANSI A2, PU-belagda handflattor för flexibelt halkfritt grepp, nötningsbeständig, överlägsen passform och känsla, 18g
4.1/5

€ 354.19

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array

Total:€ 0.00

Se varukorgKolla upp

Kategorier

Alla kategorier
Meny Kategorier Nära Vagn

Menu