GE LED Tape Light Plug-In Strip Light, Cool White, 20 fot 20 fot

Brand:GE Lighting

3.7/5

784.25

Förbättra enkelt atmosfären i ditt utrymme med vårt coola vita LED-tejpljus. LED-tejpen har en hög lumeneffekt för dramatisk accentbelysning. Installera var som helst med fäste med självhäftande baksida och medföljande klämmor. Klipp till önskad längd för en exakt passform eller använd den medföljande anslutningssladden för att böja runt hörnen. Power LED-tejplampa tänds och släcks med integrerad strömbrytare.

Inga enheter tillgängliga
Inkluderar en (1) 20-fots ljuslist med plug-in. Enkel, gör-det-själv-installation - Lägg till ytor med antingen den självhäftande baksidan eller de medföljande klämmorna för att skapa en dold look. Lätt att anpassa - Klipp av tejpljuset till den längd du behöver och använd den medföljande flexibla kontakten för att böja runt hörnen. Hög ljuseffekt - Det här starka ljuset är perfekt för accentbelysning och för att förbättra atmosfären i alla utrymmen. Lägg till en dekorativ accent - Lägg till en kall vit glöd till alla utrymmen med denna integrerade LED-tejplampa.
Batteries Required? ‎No
Color ‎Cool White
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 39 ratings 4.6 out of 5 stars
Included Components ‎One
Item model number ‎93129118
Item Package Quantity ‎1
Item Weight ‎8.6 ounces
Luminous Flux ‎4000 Lumen
Manufacturer ‎GE Lighting
Material ‎Plastic
Part Number ‎TAP240PI4000-830WTRMC2P
Power Source ‎Corded Electric
Product Dimensions ‎6.5 x 2.17 x 6.5 inches
Size ‎20 ft
Type of Bulb ‎LED
Warranty Description ‎5-year warranty
Wattage ‎42 watts

3.7

8 Review
5 Star
69
4 Star
25
3 Star
6
2 Star
0
1 Star
0

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: Nicholas
Light bright
works well, but the pic is bad. way too bright for indoor use.
Scritto da: Amazon Customer
Bright and super easy to install!
My apartment didn’t have any lights in the bedroom or in the closet but I couldn’t put any holes in and didn’t want to clutter up the floor with a lamp so I got these LED strips to put in my closet. Super easy took about 5-10 minutes to install and they’ve been staying up great!
Scritto da: Kim T
Perfect for under cabinet lighting
These are nice and bright and perfect for under my cabinets. Light up the kitchen really nicely. The adhesion is good, except on the side with the plug and switch. Those seem to weigh it down a bit, but not a huge deal. I wrapped up the cord and rest the switch on the plug. I am thinking about getting some 2-way tape or something to hang the switch under the cabinet.
Scritto da: Debra Cheney
Will not stick .
They do not stick very well and the strip is not real thin.
Scritto da: ESparks
Simple light Solution
These lights were a quick easy simple to install solution. My house is 122 years old and, so it was a great way to add light without overloading power.
Scritto da: Alberto
works, but could use a connector solutions kit
You get two 10-foot strings of self-adhesive LED lights. Theres a few things in the kit to solve some probelms: short connector to bend on corners, clips to attach the strip better, and a power supply with a switch to turn them off easily. But, I think some people could use a second power supply, or alternatively a longer wire connector. I say this because mine wouldve worked perfectly if it wasnt for a weird jump over the stove. It ended up working, but it looks weird. I know theres some simple customization I can do to solve this, but I was honestly too lazy to try (its relatively easy with a little soldering experience and the right tools). Seeing how they solved for making a quick connector, I think they could potentially offer a kit for other connectors and solutions. If that exists, then this is a great kit to start, since some ppl will be perfectly fine with a continuos strand of lights. BTW this can be cut to fit at approx 8" intervals, so it can be used for any space 20' and under. Its bright enough to cover a slightly longer space, you just need to do some testing and preparation first. If you're doing a space under 10', you'll use only one strip and it will feel like a huge waste because you will not be able to power the other strip (Im not sure if they sell power supplies separately, will update if I find anything). Im fairly sure you can add atleast one more 10' strip to the same power supply to extend the light strip. I will update if I find info on the limit of strips per power supply. Overall, a good solution which is potentially perfect if there is a kit for solutions and extensions *Update: from a little research I found some cheap solutions to connect strips. Theres some that already have the 90 degree bend for corners, and even T-connectors BUT I couldnt find anything GE specific. I think the generic connectors could work, but they most probably need some tinkering to get them to work properly
Scritto da: SteveinKC2
Really couldn't be easier, trimmable, spliceable, self adhesive, normal AC Plug with a switch too
This is a fantastic product, it lost one star on a technicality, when the instructions use such a small font it requires reading glasses, direct light and either my phone or a magnifying glass to read, the product loses one star as some of us DO still read the instructions and there is no good reason to not use a slightly bigger piece of paper and double the font size to at least a 6pt. Now, regarding the application of the product, I was replacing a tube lighting strip that highlighted the plant shelf above my Master Bathroom double vanity. I have had the house 22 years and this is the third tube light that has worn/burned out, with only two bulbs in the tube still burning white, and after taking them down there were several more that were dimly glowing red light. The plant shelf is roughly 16' long and has a piece of upside down crown molding concealing the front edge of the shelf. Installing the GE LED strip really couldnt have been easier once I was up there to take down the old tubelight. Starting at the end where my electrical receptacle is, I plugged in the ac cord, removed a couple feet of the paper strip covering the adhesive, and simply pressed it against the back of the crown molding about an inch down from the top edge of the molding. Repeating every few feet until I got to the other end, where the excess lights are then trimmed with a simple pair of scissors, you just cut wherever there is a little picture of scissors between the lights. Then I just turned on the switch, and was done! I expect the new lights to last much longer and use a lot less energy than the old incandescent tubelight, plus are approximately twice as bright when both were brand new. The light is pure white, not too blue, not too yellow. All in all, I am 5 Stars satisfied with the product except for the "font too small" deduction. In retrospect, it was so self explanatory with the trim here pictures, etc, most will not read the instruction sheet anyway. There were also wires and connectors in the box if your application requires splicing two pieces of light strip together, where it would probably be wise to break out the magnifying glass to read the instructions first.
Scritto da: Alla S.
Decent illumination
This tape light came with connecting cords, connectors, clips, and screws. The tape light that I got was twenty-feet in length, and I like that the length could be adjusted as needed. I found it easy to install and the adhesion worked well. The light itself was very bright and provided decent illumination.

Relaterade produkter

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array