DROK 200085 3V till 5V Boost Converter, Slim DC 3-5V till DC 5 V 3A Step Up Volt Regulator Module Volt Transformator Board Strömförsörjning

Brand:DROK

3.1/5

369.08

Parametrar: Arbetsspänning: DC 6V-90V (utgångsspänningen är 0-100 procent av inspänningen) Potentiometer: Motstånd B10K; Linje 20cm; Hål 8mm Kontrolleffekt: 48W-720W Märkström: 8A Maximal ström: 15A Hastighet Justerbart område: 0%-100% PWM Frekvens: 16KHZ Dimension: 64 89 28mm Nettovikt: 75g Obs: Strömförsörjningen ska vara DC, kan inte vara AC, annars kommer DC-motorns hastighetsregulator att brännas. Se till att anslutningen till strömförsörjningen är korrekt, annars kommer hastighetsregulatorn att gå sönder. Det positiva och negativa av motorn kan ignoreras, när körriktningen inte överensstämmer med förväntningarna kan du justera ordningen på kabeln för att ändra orienteringen. Justera potentiometervredet, som kan ändra utgången som upptar vakansandelen på styrenheten, för att ändra motorhastigheten. Paketet innehåller: 1 x DC-motorhastighetsregulator

Anslutning av extern positiv negativ omkopplare kan uppnå positiv inverteringsfunktion. Kan styras av extern 0-5V, och användas på PLC för att styra motorhastigheten direkt. Justera ratten på potentiometern för att ändra utgången som upptar Vacancy-andelen på styrenheten, och motorhastigheten kommer att ändras. Justera ordningen på kabeln för att ändra orienteringen; kan styra motorhastigheten för att ändras från 0 procent till 100 procent, och den är ljudfri när motorn är på låg hastighet. Med en standardstorlek (5mm*20mm) 15A snabbsäkring keramisk säkring, och strömomvänd anslutningsskydd och överspänningsskydd, säkrare att använda.
Country of Origin China
Is Discontinued By Manufacturer No
Item model number 200085
Manufacturer DROK
Package Dimensions 5.4 x 3.3 x 1.8 inches; 3.53 Ounces

3.1

13 Review
5 Star
55
4 Star
17
3 Star
15
2 Star
3
1 Star
11

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med*

Scritto da: WH7QQ
Works well and was easy to hook up.
Amazon, for some weird reason, on my orders shows this as an "up" converter which it absolutely IS NOT. It is a very usable PWM type speed control for DC motors. I have it working to control the DC gear motor from an old battery drill and it gets its power from a DC power supply from an old, dead laptop (18v 6A). It does my job perfectly. If you are looking for an up converter, look elsewhere.
Scritto da: GT
Works properly, no problems
What I ordered was "Motor Speed Controller, DROK DC Motor Speed Control 6V-90V 15A 1000W 16KHZ PWM Controller 6V 12V 36V 60V 90V Speed Regulator Module Board Support PLC Control " and that's exactly what I got. I installed it and it works without issue. MUCH cheaper than replacing the entire unit. A+
Scritto da: MARIUS
Easy to use but it doesn't have Forward/Backward function
I intended to use the product together with a Raspberry Pi and realized shortly that it doesn't have a built in Forward/Backward function. Everything else is good.
Scritto da: LUIS PEÑA
Excelente controlador
Es muy fácil de usar. Lo usé para controlar la velocidad de un motor reductor que acondicione a mi máquina de coser...
Scritto da: brian collinsworth
Awesome
Works great. Slowed my scavenge pump down to quiet it up.
Scritto da: John Gennero
Works well
Does exactly what it's supposed to do. Would buy again.
Scritto da: Earthly Traveler
Reliable so far.
Work as promised, no complaints.
Scritto da: Olle Gladso
Great for controlling relatively high voltage DC loads.
Perfect! I use it as a controller for an electric resistance heater in an electric vehicle.
Scritto da: Tate
Great voltage converter...
I used this to drop 18 vDC from an M18 Milwaukee power tool battery to 12 vDC output to operate a kid's electric ATV ride-on. The Milwaukee (or your own favourite tool manufacturer - yellow, green, orange, whatever) batteries are easier and quicker to charge than the OEM gel battery which is lead-acid. This allows me to adjust the output so that I don't overload the 12 vDC motors...or add a "turbo" feature for more excitement! Note: the potentiometer is a 10 k-ohm one and the circuit board needs to be under load to see the true motor output. If you test the motor voltage while not loaded, it won't show much difference from the input battery voltage. Basically, it works and works well.
Scritto da: Amazon Customer
Works Great
Using it to power my girls Power Wheels with a couple of 18V batteries and this items works perfectly for this. I've tried a couple of the other ones with a lower current rating and they burnt out after a short while. I wouldn't hesitate to buy another one of these should I need a similar converter.
Scritto da: Daniel G.
No component numbers
It seems to work with the included potentiometer. However it seems that the component numbers have been erased from the IC and all of the MOSFETs, so there is no way of telling what the circuit is. I needed to make some changes to work with a hall sensor throttle but I can't tell what the components are. I don't understand this seemingly deliberate obfuscation.
Scritto da: Marcel Bourgoin
seems to work ok
heat sinks a little small when using above 60 V @ 10 A it over heats
Scritto da: Amazon Customer
Good choice
worked asnavertized no problem setting

Relaterade produkter

hot
Bell & Gossett 189143 värmemotor
4.1/5

€ 1172.49

Bell & Gossett 189143 värmemotor
4.1/5

€ 1172.49

Upptäck vårt internationella nätverk

Vi skickar till 28 länder, över 200 000 produkter. Håll dig uppdaterad, prenumerera på nyhetsbrevet.

Array