CURT 56365 Fordonssidan anpassad 4-stifts släpkablar, passar till utvalda Honda Pilot, Ridgeline

Name: CURT 56365 Fordonssidan anpassad 4-stifts släpkablar, passar till utvalda Honda Pilot, Ridgeline
Brand: CURT
SKU: 0612314563654
Price: 1289.87 SEK
Availability: InStock

Brand:CURT

3.3/5

€
1289.87

CURT-anpassade kablagekontakter är det enklaste sättet att utrusta ditt fordon med en CURT-trailerkabelanslutning. De är byggda med någon av de mest avancerade teknikerna i branschen, och var och en är skräddarsydd för att fungera med ett specifikt märke och modell. Vissa biltillverkare installerar ett speciellt uttag på fordonet som ska användas för kablar mellan fordon och släp. Även om detta speciella uttag inte är utrustat på alla fordon, använder en CURT anpassad ledningskontakt - även kallad en T-kontakt - uttaget för enkel, stressfri installation. Istället för att kräva att du skär, skarvar och löder in i ditt fordons ledningssystem, använder den anpassade ledningskontakten en enda OEM-kompatibel kontakt och ger omedelbart en standard, universell ledningsanslutning mellan fordon och släp, vanligtvis i form av en 4-vägs platt. Alla CURT anpassade ledningsanslutningar görs fordonsspecifika för enklast möjliga installation och bästa passform. Denna speciella plug-in-kontakt ger ett 4-vägs platt uttag och är designat för att vara ett anpassat kablagealternativ för vissa år av Honda Pilot och Ridgeline (fabriksdragpaket krävs; för att verifiera ditt fordons kompatibilitet, se applikationsinformation). Den levereras med all nödvändig hårdvara för att upprätta en stabil anslutning. Den kommer också med ett dammskydd för att hålla kontaktuttaget rent när det inte används. För att säkerställa långvarig tillförlitlighet är alla CURT anpassade ledningsanslutningar noggrant testade för optimal funktionalitet. Stress är det sista du bör känna när du drar en släpvagn -- oavsett om du drar din husbil till den favoritcampingdestinationen, dina terränghjulingar upp till jaktmarkerna eller din fiskebåt till den nya dolda hotspot. På CURT tycker vi att din dragutrustning ska öka njutningen av din upplevelse, inte förringa den.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0612314563654

Kategorier Automobiler, Exteriöra Tillbehör, Telfer & Vinschar, Hitch Tillbehör, Wiring,

DAMMSKYDD. För att främja långvarig användning och väderbeständighet, kommer denna 4-poliga släpvagnsbelysningskabelhärva med ett dammskydd av gummi. Den passar lätt på den platta 4-vägskontakten när den inte används, vilket skyddar den mot utomhuselementen. PÅLITLIG KRAFT. Denna 4-vägs släpvagnskabelstamm är byggd med ytmonteringsteknik. Denna typ av kretsar genererar mindre värme, optimal ljusintensitet och hållbar prestanda. FORDONSPECIFIK. Detta eftermarknadskabelnät för fordon och släp är designat för utvalda år av Honda Pilot och Ridgeline (fabriksdragpaket krävs). STANDARDKONTAKT. Denna plug-in 4-platta släpvagnsledning kan användas för att ansluta släpvagnsbakljus, bromssignalljus och blinkers. 4-vägs släpvagnsljusledningar är populära på ett brett utbud av släpvagnar, vilket ger mångsidiga dragmöjligheter för ditt fordon. LÄTT ATT INSTALLERA. Ingen skärning! Ingen skarvning! Denna släpvagnskabelsats ansluts till befintliga fabriksledningar på ditt fordon och utrustar den med en standard, bakre 4-polig släpvagnskabelkontakt för att koppla in och dra en släpvagn.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 87 ratings 4.2 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56365
Item Weight	0.84 Pounds
Item Weight	‎13.4 ounces
Manufacturer	‎CURT
Manufacturer Part Number	‎56365
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56365
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: D

need update for Ridgeline missing fuses and directions incomplete

While the it appears to be a good value and is not that bad to install. Directions need to be updated for Ridgeline 1. Picture of where to plug the Custom harness into behind the rear seat. You have to reach way up there and just feel for it to pull it down to expose it. 2. While I have the breaks/turn/hazard lights working the tail/running lights will not come on. It also appears that not all fuses needed are included . It’s looking like I will need to get 2 more 20A fuses to fill out the entire fuse box. Picture of the fuse box has all fuses installed but the kit does not include all the fuses required. Picture shows a yellow 20A fuse in position 3 but directions say to use a 10A Also picture from mfg website on directions shows all fuses installed. Yellow = 20A Red = 10A Brown = 7.5A I have a 2019 Ridgline RTL 2 Wheel drive (FWD). See the included pictures of fuse boxes One from Website of mfg and one from my 2019 Ridgeline Now I am going to get some more fuses and see if that fixes it to make it look just like the picture of the installation manual. From mfg website. Which is in color Includes Printed directions are in black and white I found this on a forum, looks like there is a wire harness problem from honda perhaps where Running lights will not come on . ----------- My 2017 Ridgeline Touring AWD has the the 7 pin trailer plug. Without the vehicle running and no park or headlights on, there is dc power on one terminal only of the truck connector. When the vehicle is running, my utility trailer (factory made) lighting works fine except for park lights. Re, the trailer.... brake lights, turn signals all work fine in conjunction with what the Vehicle is doing except: the park lights as well as license plate light do not energize when the vehicle's park or head lights are on. What I have done temporarily (until I figure it out) is connect that one dc supply on the factory installed 7 pin trailer connector, to the side marker lights and license plate to make them work. Ergo, the side lights of the trailer energize whenever I start the vehicle and connect the trailer harness, but only because I've connect those trailer side lights wire to that one constant dc power source in that connector. I'm not a newbie to electronics, dc lighting or mechanical. Being doing it for 40 years. Any body else notice this issue? Thanks John Interesting John. I just got to the bottom of my problem, which sounds like yours. (2017 Ridgeline RTS). My neighbor completely re-wired the livestock trailer and when we tested it yesterday, everything worked except the running lights (the lights that are on when the lights are on in the truck). We diagnosed the problem to be in the plug, since when we plugged the same wiring harness (7 to 4 also) into a different truck, all lights worked. My mechanic spent more than an hour this morning and finally fixed the problem. Two wires in the Honda plug (where I plug in my 7 to 4 wiring harness to the trailer), were apparently switched at the factory. He called Honda to get a new plug and was told that they are back-ordered. To fix the problem, he switched the 2 wires himself and now all the lights work, including the running lights (you could call them the tail lights, also). My guess is that my plug came defective from the factory in Alabama. Is that your guess also? My question is was there a recall on this problem? Was it all 2017 models? Thanks, Lee in Iowa

Scritto da: Brandon loco

Are your running lights not working on your Honda Ridgeline with the Curt wire harness?

Everything was pretty simple with the kit except the instructions are a little bit off. I have a 2017 Honda Ridgeline front wheel drive vehicle. I installed per the instructions and my running lights on the trailer wouldn't work. These are the changes that should happen IMO. 1.) It says to route the 4 way connector to the trunk but no way is that possible on this vehicle. With the black wire protector it fits great kinda pinched between the plastic on the bottom near the hitch, that way it can easily slip out or stay up when not in use. 2.) VERY IMPORTANT!!! The instructions say use fuse 3 and 6, the diagram has an arrow pointing to fuse 7 (WHY???). I had to use fuse 6 and the fuse that went into 3, I placed in spot 9 and that got my running lights working. I'm not sure what fuse 3 is for but in my circumstance it wasn't needed.

Scritto da: Amy

Very easy to install

The instructions were perfect and easy to follow. The lights worked great without any issues. I installed them on a 2009 Honda Pilot.

Scritto da: Jason

Easy trailer wiring kit

Directions are accurate and install took 20 minutes. Harness worked perfectly. Only gripe if at all is the lack of mounting bracket for the flat 4 plug. I would have paid more if it was included

Scritto da: Aisa

It did not work on my 2010 pilot

Installed it as directed, but it did not work. I then returned it and bought the tow ready T-one 118491 and it works.

Scritto da: Kenneth Laird

The product was eventually made to work, but information ...

The product was eventually made to work, but information I found in another user's review proved to be crucial in getting it to. I think the manufacturer should have known that for the product to work, fuses had to be already in place in certain locations in the engine bay fuse box. This is a very specific use case product, 2017 Honda Ridgelines and earlier model Pilots. Updates and notifications should have been all over their website about this since getting printed instructions updated is not feasible.

Scritto da: GK

Great Product, does what it needs...

Worked Great for 2010 Honda Pilot. Instructions and all was good. Product works as expected. thanks

Scritto da: Amazon Customer

2011 Honda pilot

Works great with my honda pilot. Easy to install with just a few tools.