BOSCH 5 in. Vinkelslip med Tuckpointing Guard GWS13-50TG

Name: BOSCH 5 in. Vinkelslip med Tuckpointing Guard GWS13-50TG
Brand: BOSCH
SKU: 0000346624793
Price: 5395.96 SEK
Availability: InStock

Brand:BOSCH

3.3/5

€
5395.96

Bosch GWS13-50TG tuck pointer-paket har en 5 In. vinkelslip och ett dammskydd utformat speciellt för tuck-pointing. Bosch GWS13-50 5-in. vinkelslipen levererar mer kraft än tidigare generationers modeller med samma storlek verktyg – 13 ampere och 11 500 rpm. Den har riktat luftflöde som leder bort damm från viktiga komponenter, och den har direkt motorkylning, vilket ger den högre överbelastningskapacitet. Den har ett sidohandtag för vibrationskontroll i två lägen och en konstant elektronikmotor för enkel start. TG502 dammskyddet som pekar på instick tillåter verktygslös installation, vilket gör det snabbt och enkelt att installera och ta bort. Den variabla djupjusteringen gör att skyddet samlar damm under hela skärningen, och det stora visningsfönstret gör det lätt att se skärlinjen. Kvarnen och dammskyddet är en del av Bosch PRO+GUARD dammlösningar, ett end-to-end dammuppsamlingssystem som hjälper användare att gå mot OSHA Silica Table 1-överensstämmelse.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0000346624793

Kategorier Verkyg & hemförbättring, El & handverktyg, Elverktyg, Slipmaskiner, Vinkelslip,

HÅLLBARHET: Med kolborstar för att ge mer hållbarhet än tidigare generationers borstar. GWS13-50TG levereras också komplett med Bosch Service Minder-borstar för att låta användaren veta när förebyggande underhåll krävs. DAMMSKYDD: GWS13-50TG levereras komplett med ett dammskydd som riktar sig mot instick som är designat speciellt för applikationer för instoppning och tillåter verktygslös installation. Det direkta luftflödet leder bort damm från vitala komponenter i kvarnen. KRAFT: Med en kraftfull 13-amps slipmotor, kan vinkelslipen GWS13-50TG producera upp till 11 500 rpm. Tillsammans med det möjliggör den direkta motorkylningen högre överbelastningskapacitet. TUCK-POINTING: Bosch GWS13-50TG vinkelslip och tuck-pekande dammskyddspaket levererar en allt-i-ett tuck-pointing-lösning som kan hjälpa användaren att gå mot överensstämmelse med OSHA-förordningen om kiseldioxiddamm.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	BOSCH
Brand	‎BOSCH
Customer Reviews	4.3 4.3 out of 5 stars 54 ratings 4.3 out of 5 stars
Included Components	‎
Item Dimensions LxWxH	12.3 x 4 x 4 inches
Item Dimensions LxWxH	‎12.3 x 4 x 4 inches
Item model number	‎GWS13-50TG
Item Package Quantity	‎1
Item Weight	5.3 Pounds
Item Weight	‎5.3 Pounds
Manufacturer	‎C & J Direct GmbH & Co. KG
Maximum Rotational Speed	‎11500 RPM
Measurement System	‎Metric
Part Number	‎GWS13-50TG
Power Source	Air Powered
Power Source	‎Air Powered
Product Dimensions	‎12.3 x 4 x 4 inches
Size	‎5"
Style	Angled
Style	‎Angled

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Joe Melton

Works well, but recommend only for larger jobs.

Worked great. I tried a tucking bar to remove old mortar between cinderblocks, and it barely scratched it. This tool, outfitted with a sandwich blade, chewed right through the motor. I'd estimate it can go the length of a cinderblock (16") in less than five seconds. The depth is adjustable; I was cutting to about 3/4" deep. I spent a lot of time looking at ads trying to figure out if the tool comes with a blade. It doesn't, and the manufacturer has gone to some length, in my opinion, to not say so in the literature. Be aware that this thing throws out an enormous amount of dust and sand-like particles. I bought the special hose to connect it to a shop vac with a paper filter, and it was clogged up after a minute or so. Outside, no vac is required, but care should be taken not to blow the debris directly at your face or at another person. I wore a full-face shield with respirator, and recommend this. My hair got terribly matted with the dust, but my eyes and nostrils were not affected. I first tried to use a 4.5" grinder, and it worked ok. This tool is much more efficient, though. If you have a very small amount of tucking to do, then go ahead and use a 4.5" grinder, like the Harbor Freight model. You won't be able to attach a hose to it, so some deep cleaning will be necessary after doing work inside.

Scritto da: NameIDidntWant

Sort of works...

I recently used a Bosch surface grinder with a dustless attachment and I was blown away by how well it collected the dust. I immediately ran to Amazon to get a dustless tuckpoint grinder too, thinking this technology was really going to change my gritty, dirty life! Unfortunately, although the surface grinder was a home run, this tool is kind of a bunt . It probably gets 60 or 70% of the dust, but 30% of the dust from grinding out mortar is still an awful lot of dust. Also, it is pretty awkward to use as you can only hold the grinder in 1 position to get full depth grinding, and the hose comes off at a weird angle. Although the depth is adjustable, the angle at which you enter is not, as the whole apparatus is pinned in place by the side handle. I'll probably keep using it, but after the first 2 jobs I'm not terribly impressed. In Bosh's defense, it's a difficult problem to tackle.

Scritto da: Heidi Roth

Heavy and hard to use

I was hoping I was getting a quality grinder. Not only did I have to find a spacer because the blades don't fit in the dust catcher, but I have had the motor stop turning while doing simple grinding of mortar joints. Sad. I spent alot of money on this new setup. Also trying to grind things to the left you can't get withing 5-6 inches because all the knobs and things.

Scritto da: K. Kim

cool but needs more power and blade

The cover does a great job of dust collecting. The down side are it does not come with any blade and the power seemed low when I was cutting to demo tile on backer board. ALso would be nice to be able to bring the blade lower with the dust collector on. it can only cut in 1.5in with the cover on.

Scritto da: Bikerprophet

Powerfull

Heavy, a monster, eats mortar and did the job as designed, saved a lot of manual labor. If you need to do tuckpointing, this is the complete tool for you, worth every penny.

Scritto da: Cari B.

Happy

Excellent purchase, better than the grinders I buy from the distributor.

Scritto da: Josh

Excellent product

Excellent product

Scritto da: Allan Wind

Repointing stairs was really easy

I needed to replace some mortar on my front stairs. As expected hammer & chisel is a lot of work and takes forever. With this grinder it was almost too easy. The only issue is that you cannot get close to the walls as the vacuum attachment is quite bulky.