Armacost Lighting 133210 Ribbon Flex Pro 12-Volt White Tape Light 120 lysdioder/meter, 8,2 fot, 2700K 8,2 fot 2700K

Name: Armacost Lighting 133210 Ribbon Flex Pro 12-Volt White Tape Light 120 lysdioder/meter, 8,2 fot, 2700K 8,2 fot 2700K
Brand: Armacost Lighting
SKU: 0810976030006
Price: 1028.63 SEK
Availability: InStock

Brand:Armacost Lighting

3.8/5

€
1028.63

Armacost Lightings RibbonFlex Pro LED Tape Light är den perfekta LED-ljusremsan för lågspännings-, energieffektiva accentbelysningsprojekt. Dessa LED-lampor är designade för att möta layout- och installationskraven hos belysningsproffs och har högkvalitativa komponenter av professionell kvalitet som håller längre och skapar ett förstklassigt utseende. ett permanent håll. LED-ljustejp är idealisk för många applikationer, inklusive belysning under skåp, takbelysning, tåspark, husbilar, båtar, husbilar och kommersiella utrymmen. RibbonFlex Pro LED Tape Light är en del av Armacost Lightings komponentbaserade system av högsta kvalitet, designat för skräddarsydda installationer.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0810976030006

Kategorier Verkyg & hemförbättring, Belysning & takfläktar, Vägglampor, Under- skåp,

3M självhäftande baksida: Alla RibbonFlex Pro 2835 LED Tape Light levereras med peel-and-stick 3M självhäftande baksida för ett långvarigt, permanent grepp. Energieffektiva: LED-lamporna använder 12-volts lågspänningsström (strömförsörjning säljs separat), vilket gör lamporna exceptionellt energieffektiva. Långvarig: Klassad för 65 000 timmars kontinuerlig användning. Lätt att installera: Dra helt enkelt av och klistra fast tejpen eller klipp och anslut igen för anpassade installationer. LED-remsljus av professionell kvalitet: Med branschledande livslängd och högre lumeneffekt är detta den perfekta LED-lösningen för arkitektonisk LED-belysning, belysning under skåp, takbelysning för brickor, tåspark, husbilar, båtar, husbilar och kommersiella belysningsprojekt.

Batteries Required?	‎No
Brand	Armacost Lighting
Brand	‎Armacost Lighting
Color	2700K
Color	‎2700K
Color Temperature	2700 Kelvin
Color Temperature	‎2700 Kelvin
Control Method	‎App
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 53 ratings 4.7 out of 5 stars
Included Components	‎
Item Dimensions LxWxH	‎98 x 0.38 x 0.06 inches
Item model number	‎133210
Item Package Quantity	‎1
Item Weight	‎3.48 ounces
Light Color	White
Light Color	‎White
Light Source Type	LED
Light Source Type	‎LED
Manufacturer	‎Armacost Lighting
Material	Copper
Material	‎Copper
Mounting Type	‎Adhesive,Ceiling,Under Cabinet
Number of Items	‎1
Number of Light Sources	‎120
Number Of Pieces	‎1
Occasion	Christmas
Occasion	‎Christmas
Part Number	‎133210
Power Source	DC
Power Source	‎DC
Product Dimensions	‎98 x 0.38 x 0.06 inches
Shape	‎Straight
Size	‎8.2 ft
Style	120 LED/m
Style	‎120 LED/m
Theme	Indoor
Theme	‎Indoor
Usage	‎indoor use only, Under cabinet lighting, cove lighting, accent lighting, led lighting
Voltage	‎12 Volts
Warranty Description	‎Limited 3 year warranty.

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: S. Martin

Works great

Glad I went with the 120 LED version as it rivals the brightness of the halogen that it replaced even when mounted in the aluminum channels with diffuser. The dimmer switch tames the brightness when needed. I would have been disappointed if the maximum brightness was less. I had about six feet of led on either side of the transformer and didn't experience any significant voltage drop and I used 20ga wire.

Scritto da: John

Great lights

I used these lights as kitchen undercounter lights. They are as bright as one might ask for. My only disappointment is that the color is not variable. They are 4,000 degrees while the overhead lights in the kitchen have five variable light colors, ranging from 2,700 to 5,000. Nevertheless, these are great lights.

Scritto da: James M.

NICE LIGHTS

THESE ARE VERY NICE LIGHTS AND BRIGHT I INSTALLED UNDER MY NEW KITCHEN CABINETS AND THEY LOOK AMAZING AND SO FAR THE ADHISIVE THAT IS ON THE LIGHTS HAVE HELD UP THERE NOT FALLING OFF THE BOTTOM OF THE CABINETS AND I ALSO STUCK THEM ON THE GRANITE COUNTERTOP UNDER THE ISLAND OVER HANG AND STILL HOLDING UP

Scritto da: VB

Generally satisfied, the closer spacing of the LEDs makes for uniform lighting.

First experience with LED strip lights. Mostly positive experience. The 2700K is very warm, I expect going to 3000K would have been better in my case. I think that if the light is going to be truly indirect the bouncing may cause the harshness of the whiter color ranges to mellow. The strip is very narrow, which make placement easier but if you solder the wiring it can be tight. The spacing on the solder points is around 18 inches which can be annoying. My installation has then adhered at 45 degrees on the ceiling. Inspecting after two weeks had a few spots where the adhesion was failing, but its possible I didn't thoroughly press the entire strip during install. They are adhering to mdf painted with primer.

Scritto da: Crimsoncascade

Good for undercabinets but not bigger jobs

I did a project of using the Armacost large transformer and about 28 feet of this Armacost 120-LED ribbon. The project was to replace a long set of flourescent fixtures that were indirectly lighting my midcentury modern ceiling. (In the past, I used some of this to do undercabinet lighting in a laundry room.) I would never attempt this again. For undercabinet, this works well as long as you have someplace to put the transformer! But for this big job, several unexpected issues arose. First off, the ribbon is very hard to work with at long length. I found the adhesive doesn't stick well, the ribbon doesn't like to stay flat, it smells yukky, and even the 120-LED ribbon really isn't bright enough to do much other than accent lighting for a ceiling. It's very bright when you're 2 feet away, like a kitchen counter under a cabinet, but the light doesn't seem to go much farther than that. Also, the transformer and the ribbon LED's get crazy hot very quickly. I'm not confortable taping the ribbon at this heat level to wood, so I had to rig up using a metal molding -- tons of work I wish I had never gotten involved with. Also, at longer lengths, you can see that Armacost recommends you put the transformer in the middle of the run. That meant I had to extend my house wiring -- what a pain. I feel silly that I didn't just buy a few linkable 4 or 8 foot LED fixtures that run around $30 apiece and plug into an outlet (or hard wire) at one end. (I used these in my shop room and they installed in minutes and work fine though are not dimmable.)

Scritto da: Erik Pearson

Expensive, but worth it.

I bought the 33' version, cut it into 2 strips and soldered them in series as shown in the picture. It puts out plenty of light using the Armacost 60watt power supply (sold separately) . I went with the dimming power supply and it works like a charm with a Lutron Diva switch. I shopped around and this appeared to be the best/brightest/dimmable LED strip around.

Scritto da: Scott S.

Great light

High density led tape puts out great light

Scritto da: Gary Reid

Easy to install with a great finished look

Used as under-cabinet lighting these work very well. The 120 LED per meter version provides a lot of light for food prep and, if used with a dimmer, can provide a nice ambience at night when regular room lighting isn't necessary.